КАБЕЛЬНОЕ ОБОРУДОВАНИЕ
Продукция и производство
Начните с кабеля, который вы хотите изготовить.
Оборудование для производства оптического кабеля
Оборудование для витой пары
Оборудование для изолированных проводов и кабелей
Запасные части для оборудования HONGKAI.
Просмотр деталей по производственной линии
Проверьте фотографии, таблички с наименованием и номера деталей
Отправьте данные оборудования, фотографии и количество
Изучите конструкции кабелей и входные данные.
Просмотрите типы оптоволоконных кабелей
Материалы для производства оптического кабеля
Планируете построить целый завод?
Свяжите ваш продукт, производственные линии и потребности в материалах.
COMPLETE FACTORY SOLUTIONS
Готовые кабельные линии, материалы, компоновка и поддержка при запуске.
Изготовление кабелей, сборка MPO и окончательное оптическое тестирование.
Базовый кабель, сборка разъема, полировка и отгрузка.
Подбор оборудования и планирование процесса для сетевого кабеля.
Принимайте обоснованные решения до инвестирования.
Понимание инвестиционных затрат
Ознакомьтесь с исследованием процесса
Сравните тройную и двойную скрутку
Ваш продукт является отправной точкой.
Спланируйте оборудование, материалы и завод вокруг него.
Φ90 mm extrusion · Core pay-off to finished cable take-up
Apply the specified outer sheath around your prepared optical cable core. Configure material feeding, aramid yarn stranding or metal-tape protection as required, extrusion, cooling and take-up as one coordinated production stage.
Coordinate melt delivery, tooling, cooling and traction around the cable design.
Scope boundary: this page covers the sheathing stage. Upstream coloring, loose-tube extrusion and SZ core stranding are separate processes. Reinforcement and armoring modules are selected for the approved cable construction.
Build the process around the cable layers. Optional protection modules are selected before the extrusion and downstream handling requirements are finalized.
Start with the prepared core or loose tube. Match the core, wire and protection-material pay-offs to the incoming package.
Apply the selected water blocking and ripcord. ADSS routes add aramid yarn stranding before the outer sheath; armored routes use the specified metal-tape preparation and forming modules.
Feed the approved compound to the Φ90 mm extruder and crosshead. Coordinate melt delivery, cable centering, temperature and line speed.
Cool and dry the sheath, monitor diameter, apply the specified marking and tests, then coordinate caterpillar traction with finished-cable take-up.
The same extrusion stage can sit within different process routes. Compare the incoming core, reinforcement and tape requirements before defining the equipment package.
Select a number or equipment card to see its equipment area, image and process role. Dashed regions identify process interfaces whose final position must be confirmed. The reference includes optional preparation and testing modules; the final equipment list follows your cable construction.
13 - Φ90 mm sheath extruderEquipment area in the reference arrangement
Equipment-family reference from the supplied project document. Final construction and quantity follow the approved equipment list.
Plasticizes the approved sheath compound and supplies the adjustable crosshead. The reference uses a Φ90 mm screw with a 25:1 L/D ratio.
Compound grade, screw and crosshead, tooling, temperature profile, output and required jacket dimensions.
Selected equipment 13: Φ90 mm sheath extruder
Эталонная граница: the panorama illustrates equipment order, not the final machine count, footprint or construction. Images from the project document show equipment families; the approved layout and equipment list define the supplied arrangement.
Use the reference below to begin the technical review. Confirm the complete cable construction, material grade and trial conditions before agreeing production performance.
| Review area | Reference / requirement | Condition to confirm |
|---|---|---|
| Extruder reference | Φ90 mm screw · 25:1 L/D · 75 kW main drive. | Reference equipment configuration; screw, crosshead and tooling must suit the compound and cable. |
| Aramid stranding reference | 24 heads · independent tension · adjustable pitch · S or Z lay. | Selected for the cable construction. Confirm yarn grade, quantity, tension and stranding pitch together with extrusion speed. The reference 120 rpm rotation is not a cable line speed. |
| Sheath materials | PE / PVC in the supplied extruder reference. | Confirm the compound grade and process settings. Other compounds require a separate suitability review. |
| Скорость производства | Reference: up to 80 m/min for PE cable below Φ10 mm. | Conditional source value; confirm the complete construction, jacket thickness, cooling, reel changes and quality targets. |
| Extrusion output | Reference: up to 250 kg/h PE, with the crosshead open in the source specification. | An extruder-output reference is not guaranteed finished-cable throughput. Verify it with the agreed tooling and compound. |
| Cable & tooling range | Specify incoming core, finished diameter and jacket thickness. | Review every module. A metal-tape forming tool may have a narrower range than the extruder or capstan. |
| Reels, tension & utilities | Agree supply/output drums, winding tension, layout and utility loads. | Use one approved schedule for the chosen configuration; do not infer these values from the HK-90 name. |
| Controls & acceptance | PLC / IPC coordination, recipes, alarms and agreed inspection records. | Define instruments, interfaces, safety functions, trial duration and acceptance criteria. |
Review output together with the sheath cross-section, compound, tooling and cooling capacity. Reel capacity, line footprint, tension settings and utility loads are finalized for the selected configuration.
Compare the complete cable route, then define the sheathing equipment and construction-specific preparation modules.
Review the loose-tube input, parallel strength members, metal-tape protection and outer-sheath requirements.
Открытое кабельное решение
Coordinate aramid yarn stranding with outer-sheath extrusion; confirm whether the incoming cable is a prepared core or an inner-sheathed cable.
Открытое кабельное решениеReview the published construction, armoring, messenger positioning and figure-8 crosshead tooling together.
Открытое кабельное решениеConstruction matters: armored, all-dielectric and figure-8 cables require different preparation, reinforcement and tooling. One illustrated arrangement does not establish compatibility with every cable.
For tube extrusion, review the Линия по производству свободных труб. For a stranded core, review the Линия скрутки типа SZ.
The HONGKAI HK-90 video shows a sheathing reference for an ADSS cable route. Use it to discuss equipment and operating sequence, then agree the trial for your construction.
Use the approved core, sheath compound, protection materials and output drum.
Observe extrusion, cooling, diameter monitoring, traction and take-up during starts, steady running and stops.
Check finished diameter, sheath thickness and appearance, marking, winding and the agreed optical and jacket tests.
The written proposal should connect equipment selection, integration and start-up responsibilities. Confirm the scope with HONGKAI for your project.
Start with your drawing, product requirements or existing equipment. Technical details can be confirmed during the first review.
Cable drawing and finished dimensions
Incoming core or loose-tube details
Sheath compound and jacket thickness
Reinforcement, tape and ripcord requirements
Input and output drum sizes / weights
Target output and operating plan
Marking, testing and acceptance criteria
Factory layout and retained equipment
Utilities, installation and project timing
Review the cable construction, equipment boundary and information needed for a proposal.
It applies the specified outer sheath to a prepared optical cable core or construction-specific tube and protection package, then cools, inspects and collects the cable. Upstream fiber coloring, loose-tube extrusion and SZ stranding are separate stages unless included in the project scope.
Эти семейства кабелей могут включать этап оболочки HK-90, однако они не используют один и тот же комплект оборудования. Обработка сердечника, армирование, бронирование, позиционирование несущего элемента, оснастка крестовины и последующие испытания должны быть пересмотрены для каждого чертежа кабеля.
Нет. Выбраны размотка металлической ленты, соединение, накопление, гофрирование и продольная формовка для указанной бронированной или композитной оболочки. Маршрут с полностью диэлектрической конструкцией предъявляет иные требования к армированию.
The source gives up to 80 m/min for PE cable below 10 mm and an extrusion-output reference of up to 250 kg/h PE with the crosshead open. These values describe stated reference conditions. Actual accepted cable output must be agreed for the cable, compound, tooling, cooling and operating plan.
The supplied extruder reference describes PE and PVC. Confirm the exact grade and required screw, tooling, drying and temperature settings. Do not assume that LSZH or another compound is covered without a separate engineering review.
Ссылка на оборудование включает аккумулятор металлической ленты, который хранит ленту для её последовательного соединения. Аккумулятор готового кабеля выполняет другую функцию и требует собственной конфигурации, натяжения, длины хранения и проверки при замене катушки.
Применимость испытания зависит от конструкции кабеля и наличия подходящего электрического обратного пути. Диэлектрический кабель не должен автоматически получать ту же схему испытания высоким напряжением, что и кабель, содержащий металл. Подтвердите метод испытания и критерии приемки для конкретного изделия.
Отправьте чертеж кабеля, входящую жилу, компаунд оболочки, материалы защиты, требуемые размеры барабанов и производственную цель. Приложите планировку вашего завода и имеющееся оборудование, если это возможно. Технические детали можно уточнить во время первого обзора.
English English Русский हिन्दी 한국어 বাংলা Bahasa Indonesia Tiếng Việt മലയാളം Português do Brasil العربية فارسی