CABLE MACHINERY
제품 및 생산
제작하려는 케이블부터 시작하세요.
HONGKAI 기계 장비의 교체 부품.
공장을 완전히 계획하고 계십니까?
제품, 생산 라인 및 자재 요구사항을 연결하세요.
통합 공장 솔루션
완전한 케이블 라인, 자재, 레이아웃 및 시운전 지원.
케이블 제조, MPO 조립 및 최종 광학 테스트.
베이스 케이블, 커넥터 어셈블리, 폴리싱 및 출하.
네트워크 케이블용 장비 선정 및 공정 계획.
투자하기 전에 신중한 결정을 내리세요.
투자 입력 요소를 이해하세요
공정 연구를 검토하세요
트리플 트위스트와 더블 트위스트를 비교하세요
귀하의 제품이 출발점입니다.
해당 장비와 자재, 그리고 이를 중심으로 공장을 계획하세요.
INDOOR CONNECTIONS
A figure-8 construction listed in the indoor cable range. Review support, span and installation conditions with the cable drawing; an indoor listing does not establish outdoor suitability.
맞을지 확신이 서지 않나요? 설치 작업을 시작하세요.
프로젝트에 대해 확인해야 할 사항을 보려면 시작 지점을 선택하세요.
이 케이블에 중요한 질문을 확인하려면 경로를 선택하세요.
케이블 구성품을 검토한 후, 주문하려는 구성에 대한 도면을 확인하십시오.
승인된 케이블 도면은 최종 치수와 재질을 규정한다.
보호된 광섬유 배열 및 광섬유 수를 확인하십시오.
이 참조 자료를 사용하여 요구사항을 정의하십시오. 견적서 및 승인된 케이블 데이터시트가 공급되는 제품을 규정합니다.
아래의 구조 및 설치 요구사항부터 시작하십시오.
G.652 describes single-mode fiber and cable; G.657 addresses bending-loss-insensitive single-mode fiber. Ask for the precise category and the finished-cable test limits needed by your network. For multimode requirements, state the OM category and link design.
G.652 attenuation limits are not a blanket specification for short indoor cables, jumpers or drop cables. Fiber bending performance also does not determine the minimum bend radius of a finished cable.
Public technical references checked September 2026. Manufacturer examples illustrate a construction; they do not identify HONGKAI’s source factory or establish the specification of your order.
케이블 계열을 비교할 때 경로 및 보호 요구사항을 염두에 두십시오.
Figure-8 fiber optic cable in the indoor range
A figure-8 construction listed in the indoor cable range. Review support, span and installation conditions with the cable drawing; an indoor listing does not establish outdoor suitability.
심플렉스 타이트 버퍼드 실내 케이블
타이트 버퍼 피복 광섬유, 아라미드 원사 및 PVC 또는 LSZH 재킷으로 구성된 심플렉스 실내용 연결 케이블입니다. 광섬유, 케이블 외경 및 재킷을 종단 계획에 맞추십시오.
페어링된 실내용 광케이블
페어링된 광섬유 연결용 듀플렉스 실내 케이블입니다. 주문 전에 유닛 레이아웃, 광섬유 종류, 종단 방식 및 재킷 요구사항을 확인하십시오.
GJFJTC8Y · indoor Figure-8 — from fiber preparation to agreed acceptance and delivery. See HONGKAI equipment and process references matched to the listed construction.
다음 기능은 이러한 구조가 어떻게 제작되는지를 설명합니다. 이는 고정된 기계 수량이나 최종 장비 사양을 의미하지 않습니다.
Start with the approved optical fiber. Apply and cure the specified identification colors, then rewind; if colored fiber is purchased, verify the incoming identification and package instead.
Prepare the approved fiber protection and reinforcement before cable formation. A tight-buffer step is included only when the selected sub-unit drawing requires it; it is not assumed from the family name.
Form the protected optical unit and reinforcement specified by the selected Figure-8 design. Confirm fiber protection, unit dimensions and load requirements.
Feed the specified support element and form the approved Figure-8 jacket or profile. Confirm the support construction and tooling; FTTH butterfly-drop footage is not substituted for this cable.
합의된 식별 정보, 케이블 길이 및 리일 또는 드럼 구성을 기준으로 캡스탄, 액큐뮬레이터 및 테이크업을 조정하십시오.
Complete the agreed optical and mechanical checks, inspection records, lengths, marking and packing. HONGKAI handles the agreed acceptance inspection and delivery; process videos are not batch test records.
This is a Figure-8 optical-unit construction, not automatically an FTTH flat-drop cable. Its profile and support input require a product-specific configuration. Final materials, equipment interfaces and acceptance follow the approved drawing and order.
HONGKAI coloring and rewinding footage: identification ink is applied and cured before the fiber is rewound. Already-colored input can enter the next approved production stage. Equipment and process reference only. Not proof of the manufacturing source, full equipment configuration or acceptance of your cable batch.
Only matching process functions have video controls. Other stages retain their explanation where suitable footage has not been established. These clips are not one continuous factory tour or a batch inspection record.
Independent factories manufacture the finished cable; HONGKAI handles customer-facing supply, payment, agreed acceptance inspection and delivery. Some equipment customers also manufacture the cables we supply. The actual source, specification and acceptance requirements are confirmed for each order.
HONGKAI supports cable machinery and production projects, and supplies finished fiber optic cables. Our finished cables are produced by independent factories in China that use HONGKAI equipment.
HONGKAI 공급 주문의 경우, 당사는 견적, 고객 결제, 합의된 인수 검사 및 배송 조정을 처리합니다.
Work with HONGKAI on your cable requirements, quotation and order arrangements. Specifications, payment terms and delivery responsibilities are confirmed through one supplier.
Our cable-equipment experience provides a practical basis for discussing cable construction and production requirements with supplying factories. This helps connect your application requirements with the proposed cable design.
Acceptance criteria, inspection scope and required supporting records are agreed for the order. HONGKAI handles acceptance inspection against that agreed scope before delivery.
HONGKAI coordinates delivery arrangements and order communication under the agreed commercial terms. Lead time, packing requirements and required shipping documents are confirmed as part of the order scope.
HONGKAI 케이블 제조 장비를 사용하는 중국의 독립 공장들입니다. HONGKAI 은 공급업체이며 완제 케이블 제조업체는 아닙니다. 실제 제조처는 귀하의 주문에 대해 확인됩니다.
합의된 케이블 사양, 검사 범위 및 주문 기록. HONGKAI 장비를 사용하는 것은 생산 관계이지 완제품 인증이 아닙니다.
SUPPLY & DELIVERY
One point of contact for your cable requirements, agreed acceptance and delivery coordination.
Work with one HONGKAI contact on cable requirements, quotation and order arrangements. We confirm the specification, payment terms and delivery responsibilities for your order.
Discuss the cable construction and agree the acceptance criteria, inspection scope and required records before ordering. HONGKAI handles acceptance inspection against the agreed scope.
Coordinate packing requirements, shipping documents and delivery arrangements through HONGKAI. Lead time and delivery responsibilities follow the confirmed commercial terms.
Service scope is defined in the confirmed quotation or order agreement.
HONGKAI also supplies cable-making equipment and production-project support. Start from the cable drawing, materials and production requirements.
HONGKAI combines cable-making equipment experience with customer-facing supply responsibility. Some of our equipment customers also manufacture finished cables supplied through HONGKAI. You work with HONGKAI on your requirement, payment, agreed acceptance inspection and delivery. The actual manufacturing source and specification are confirmed for your order.
A figure-8 construction listed in the indoor cable range. Review support, span and installation conditions with the cable drawing; an indoor listing does not establish outdoor suitability. Share your route, quantity, destination and any drawing or customer specification so the configuration can be reviewed.
HONGKAI supplies finished fiber optic cables and handles payment, acceptance inspection and delivery. The cables are manufactured by independent factories in China using HONGKAI cable-making equipment. The actual manufacturing source and acceptance requirements are confirmed for each order.
For finished cable orders, HONGKAI receives payment and handles acceptance inspection and delivery. The actual manufacturer, specification and acceptance requirements are confirmed for your order.
모델을 선택하지 않고 문의할 수 있습니다. 경로, 예정된 연결부, 대략적인 수량 또는 도면을 보내 주십시오. 당사가 선정에 필요한 정보를 파악하는 데 도움을 드리겠습니다.
네. HONGKAI 은(는) 케이블 제조 장비 및 생산 프로젝트 지원도 제공합니다. 장비 구성은 귀하의 케이블 도면, 재료 및 생산 요구사항에 따라 이루어집니다.
경로, 도면 또는 질문 하나만으로도 시작할 수 있습니다. 케이블 모델을 알 필요 없습니다.
또는 이메일 peterhe@hkcablemachine.com. For finished cable orders, HONGKAI receives payment and handles acceptance inspection and delivery. The actual manufacturer, specification and acceptance requirements are confirmed for your order.
English English 
Русский
हिन्दी
한국어
বাংলা
Bahasa Indonesia
Tiếng Việt
മലയാളം
Português do Brasil
العربية
فارسی
