Two-FRP aerial fiber optic cable
ASU / GYFFY Current cable
A compact aerial cable construction with a central PBT loose tube, two FRP strength members and a PE sheath. Span, loading and installation conditions define the required configuration.
AERIAL NETWORKS
ASU / GYFFYTwo-FRP aerial fiber optic cable
A compact aerial cable construction with a central PBT loose tube, two FRP strength members and a PE sheath. Span, loading and installation conditions define the required configuration.
- Starting route
- Pole / tower routes
- Configuration
- Confirm fiber, construction and jacket
- Order basis
- Approved specification and acceptance criteria
Not sure it fits? Start with your installation
Production knowledgeCable-making equipment experience.
One supplier contactPayment, acceptance and delivery.
A clear order basisDrawing, specification and agreed checks.
Start with where
the cable will run.
Select a starting point to see what needs to be confirmed for your project.
WHAT TO CONFIRM
A few details make the choice clearer.
Select your route to see the questions that matter for this cable.
- Installation method and mechanical loads
- Fiber type, count and network requirements
- Jacket, protection and acceptance criteria
Every layer has a purpose.
Review the cable components, then confirm the drawing for the configuration you intend to order.
The approved cable drawing defines the final dimensions and materials.
ഒപ്റ്റിക്കൽ നാരുകൾ
Colored fibers are placed inside the loose tube.
Specifications, with context.
Use these references to frame your requirement. The quotation and approved cable datasheet define the product supplied.
ASU / GYFFY configuration guide
Start with the construction and installation requirements below.
- കേബിൾ നിർമ്മാണം
- Optical fibers · PBT loose tube · Two FRP membersThe approved drawing defines materials, dimensions and tolerances.
- Optical configuration
- Specify the fiber category and countSelect against the network design, wavelengths and acceptance limits.
- Mechanical configuration
- Match the installation conditionsTensile, crush and bending limits depend on the complete cable construction.
Optical selection reference
If your selected fiber is G.652.D
- 1310–1625 nm
- ≤ 0.40 dB/kmG.652.D cable-attribute reference in ITU-T G.652 (08/2024), Table 2.
- 1530–1565 nm
- ≤ 0.30 dB/kmIncludes 1550 nm. These are standard limits, not a HONGKAI batch test result.
G.652 attenuation limits are not a blanket specification for short indoor cables, jumpers or drop cables. Fiber bending performance also does not determine the minimum bend radius of a finished cable.
Sources & scope
Public technical references checked September 2026. Manufacturer examples illustrate a construction; they do not identify HONGKAI’s source factory or establish the specification of your order.
Compare the construction.
Then narrow your shortlist.
Keep the route and protection requirements in view when you compare cable families.
Central-tube figure-8 aerial cable
GYXTC8S
A figure-8 aerial construction combining a central optical tube with a stranded-wire messenger. Specify the span, installation loads and metallic support requirements.
Stranded-tube figure-8 aerial cable
GYFTC8S
A stranded optical unit paired with a metallic messenger in a figure-8 profile. Confirm the messenger design, span loads and optical-core configuration.
HONGKAI equipment in customer factories.
See our equipment at work in real cable factories. Some of our equipment customers also manufacture the finished cables supplied through HONGKAI.
Tight-buffer production
HK-30 extrusion, cooling and take-up equipment in a customer factory.
Loads YouTube when you press play.യൂട്യൂബിൽ നോക്കുക
അതിന്റെ പ്രവർത്തന സാഹചര്യത്തിലെ ഉപകരണങ്ങൾ കാണുന്നതിന് ഒരു പ്രക്രിയ തിരഞ്ഞെടുക്കുക.
These videos show equipment applications, not batch inspection records for this product. The manufacturing source and acceptance requirements are confirmed for your order.
One partner for your finished-cable order.
HONGKAI connects cable-making equipment experience with finished-cable supply. Work with us on your requirement, then keep payment, acceptance inspection and delivery with HONGKAI.
A production perspective on cable selection
Our equipment business gives the cable discussion a practical starting point: how the fiber, reinforcement, protection and jacket fit the required construction.
A direct relationship with your supplier
HONGKAI is your customer-facing supplier. In our usual supply arrangement, you pay HONGKAI, and we handle acceptance inspection and delivery.
An agreed basis for acceptance
Set the cable drawing, specification, inspection scope and required records in the order documents, so the supply is assessed against your agreed requirement.
Who makes the finished cable?
Independent factories in China that use HONGKAI cable-making equipment. HONGKAI is the supplier, not the finished-cable manufacturer; the actual manufacturing source is confirmed for your order.
What establishes product acceptance?
The agreed cable specification, inspection scope and order records. Using HONGKAI equipment is a production relationship, not a finished-product certification.
Planning your own cable production?
HONGKAI also supplies cable-making equipment and production-project support. Start from the cable drawing, materials and production requirements.
Why source finished cable through HONGKAI?
HONGKAI combines cable-making equipment experience with customer-facing supply responsibility. Some of our equipment customers also manufacture finished cables supplied through HONGKAI. You work with HONGKAI on your requirement, payment, agreed acceptance inspection and delivery. The actual manufacturing source and specification are confirmed for your order.
How do I know whether ASU / GYFFY fits my project?
A compact aerial cable construction with a central PBT loose tube, two FRP strength members and a PE sheath. Span, loading and installation conditions define the required configuration. Share your route, quantity, destination and any drawing or customer specification so the configuration can be reviewed.
Is HONGKAI the manufacturer of this finished cable?
HONGKAI supplies finished fiber optic cables and handles payment, acceptance inspection and delivery. The cables are manufactured by independent factories in China using HONGKAI cable-making equipment. The actual manufacturing source and acceptance requirements are confirmed for each order.
Who receives payment and handles acceptance and delivery?
For finished cable orders, HONGKAI receives payment and handles acceptance inspection and delivery. The actual manufacturer, specification and acceptance requirements are confirmed for your order.
What if I do not know the model or specification?
You can enquire without selecting a model. Send the route, intended connection, approximate quantity or a drawing. We will help identify the information needed for selection.
Can HONGKAI also help with cable-making equipment?
Yes. HONGKAI also supplies cable-making equipment and production-project support. The equipment configuration follows your cable drawing, materials and production requirements.
Tell us about
your project.
A route, a drawing or a question is enough to start. You do not need to know the cable model.
Or email peterhe@hkcablemachine.com. For finished cable orders, HONGKAI receives payment and handles acceptance inspection and delivery. The actual manufacturer, specification and acceptance requirements are confirmed for your order.
