CABLE MACHINERY
제품 및 생산
제작하려는 케이블부터 시작하세요.
HONGKAI 기계 장비의 교체 부품.
공장을 완전히 계획하고 계십니까?
제품, 생산 라인 및 자재 요구사항을 연결하세요.
통합 공장 솔루션
완전한 케이블 라인, 자재, 레이아웃 및 시운전 지원.
케이블 제조, MPO 조립 및 최종 광학 테스트.
베이스 케이블, 커넥터 어셈블리, 폴리싱 및 출하.
네트워크 케이블용 장비 선정 및 공정 계획.
투자하기 전에 신중한 결정을 내리세요.
투자 입력 요소를 이해하세요
공정 연구를 검토하세요
트리플 트위스트와 더블 트위스트를 비교하세요
귀하의 제품이 출발점입니다.
해당 장비와 자재, 그리고 이를 중심으로 공장을 계획하세요.
USD 213,700 per quoted mechanical-testing equipment package
제안 패키지: 광케이블 기계적 성능 시험 장비. 공장 출하 납품; 구매자가 운송을 준비하고 비용을 부담함. 제공되는 계측기, 피스 및 측정 인터페이스는 합의된 장비 목록에 따름.
귀사가 제조하는 케이블을 중심으로 테스트 역량을 구축하십시오.
Explore the complete mechanical, environmental, flame and optical testing equipment series. HONGKAI helps connect the selected apparatus, fixtures and measuring interfaces to your cable specification and factory plan.
기계적, 환경적 및 광학적 시험 장비를 비교하십시오. 케이블 구조와 시험 방법에 맞는 시험 범위, 고정구 및 측정 기기를 선택하십시오.
지정된 인장 하중에 대해 완성된 케이블의 반응을 측정하며, 필요 시 케이블 신장률 및 광학 모니터링을 수행한다.
장비 범위로딩 유닛, 케이블 그립 또는 캡스턴 고정구, 하중 측정 및 제어 시스템. 광섬유 변형률 및 감쇠 측정 장비는 별도로 합의함.
Test record시편 및 요구되는 케이블 또는 광학 측정값과 연결된 추적 가능한 힘/시간 기록.
Evaluate the tensile performance of FTTH drop cable using a load range and grips suited to the smaller cable construction.
장비 범위A dedicated tensile station with cable supports, gripping fixtures, loading control and measurement interfaces.
Test recordLoad, extension and test-condition records for the selected drop-cable specimen.
파쇄에 대한 케이블의 저항성과 외피 및 광섬유에 미치는 규정된 영향을 평가하기 위해 제어된 압축 하중을 가하십시오.
장비 범위A loading frame, compression plates, load measurement and test controls matched to the selected cable.
Test recordApplied load, hold time and the recorded condition of the cable after testing.
Assess the response of the cable to defined strikes using an agreed striker, drop height and support arrangement.
장비 범위지정된 충격 순서를 위한 유도식 충격 메커니즘, 케이블 지지 고정구 및 제어 장치.
Test recordImpact conditions, number of strikes and observed cable or optical changes.
Cycle the cable through a defined back-and-forth bend to assess resistance to repeated deformation.
장비 범위A reciprocating bending mechanism with interchangeable bend fixtures, specimen loading and cycle control.
Test record시편 결과와 연관된 굽힘 반경, 각도, 하중 및 완료된 사이클 수.
Twist a cable specimen in forward and reverse directions under the agreed axial loading conditions.
장비 범위회전식 및 고정식 케이블 클램프, 조절 가능한 시편 스팬 및 제어된 비틀림 구동장치.
Test record꼬임 각도, 시편 길이, 축방향 하중 및 완료된 시험 사이클.
Assess repeated cable movement over pulleys, with travel and tension chosen for the required flexing test.
장비 범위A moving pulley assembly, guided cable path, loading weights and travel / cycle controls.
Test recordPulley configuration, travel, tension and cycle history with the specified cable checks.
Wind the cable around a defined mandrel to assess its response to the specified winding conditions.
장비 범위Driven and supporting wheels or mandrels, cable-loading fixtures and winding controls.
Test recordMandrel size, number of turns, applied load and cable condition after the test.
케이블 외피 또는 인쇄 마킹의 지정된 마찰 작용에 대한 내성을 평가하십시오.
장비 범위A controlled abrasion mechanism with specimen support and contact loading selected for the sheath or marking test.
Test recordAbrasion conditions, completed cycles and the observed sheath or marking condition.
Evaluate an aerial cable specimen under a defined hook-loading or hook-impact arrangement.
장비 범위케이블 시험 요구사항에 맞춘 서스펜디드 시편 장치, 후크 메커니즘 및 하중 제어장치.
Test recordSpecimen setup, hook-loading conditions and the recorded cable response.
제어된 고정구 이동을 사용하여 광케이블 튜브 구성품의 굽힘 응답을 평가합니다.
장비 범위A supported tube specimen, fixed and moving clamps, a controlled drive and protective test area.
Test recordTube specimen details, fixture movement and observations from the bending sequence.
Apply a controlled loading action to evaluate the cable sheath against the specified cut-through condition.
장비 범위A loading frame, cutting-contact fixture, specimen support and force / displacement measurement.
Test recordForce / displacement information and the agreed cut-through endpoint for the specimen.
정의된 진동 프로그램 하에서 케이블의 피로 응답 및 광학 성능을 평가합니다.
장비 범위A vibration drive, cable-support fixtures and controls matched to the required specimen arrangement.
Test recordVibration programme, specimen arrangement and the required optical or physical observations.
수차단 시험이 필요한 케이블 구조물의 종방향 수분 침투를 평가합니다.
장비 범위Water-head control, specimen connections and sealing accessories matched to the cable construction and test arrangement.
Test record기록된 시료 준비, 수두, 노출 시간 및 관찰된 방수 성능 결과.
Condition cable samples through the agreed high and low temperature programme and record the specified performance changes.
장비 범위A programmable environmental chamber with a suitable sample arrangement. Humidity control and optical access are selected when required by the method.
Test recordTemperature and time records linked to the sample identity and the agreed before, during or after measurements.
Evaluate the vertical flame-retardant performance of a single cable using the agreed test method.
장비 범위A vertical test enclosure with cable fixture, burner arrangement, timing and gas-flow controls.
Test recordSpecimen details, flame-application conditions and the observations required by the selected method.
Connect optical measurements with cable construction checks so test results can be traced to the finished reel.
장비 범위Optical and dimensional instruments selected for your measurement method, fiber type and cable construction.
Test recordReel-linked optical and dimensional records with the instrument, method and test conditions identified.
Share the information already available. Missing details can be resolved during equipment and laboratory planning.
케이블 드로잉, 광섬유 유형/수량, 치수, 재질 및 용도.
Applicable product requirement, test methods, sample plan and acceptance criteria.
Ranges, fixtures, chamber volume, measuring instruments and existing laboratory assets.
Floor space, utilities, sample handling, calibration, training and record requirements.
Practical answers for a new factory or an upgrade to existing test capability.
The required laboratory depends on the first cable products and the agreed acceptance plan. Review existing instruments, routine factory checks and tests that may be handled by an identified external laboratory before defining the purchase scope.
Where the test method requires it, the equipment arrangement should allow the specified optical measurements during or around the test. Instrument interfaces, access, sample preparation and record format must be agreed together.
Fixtures, load ranges, specimen dimensions and test programmes are matched to the cable portfolio. A shared machine may cover several products only when its working envelope and fixtures meet each selected method.
No. The applicable product requirement, current test method, specimen preparation, acceptance limits and recorded results determine the evidence. Equipment supply alone does not establish cable certification or complete test coverage.
Share your cable product, test requirements and existing equipment. We can then review the apparatus, fixtures and measurement scope with you.
Cable drawings and test specifications are useful but optional for the first enquiry.
English English 
Русский
हिन्दी
한국어
বাংলা
Bahasa Indonesia
Tiếng Việt
മലയാളം
Português do Brasil
العربية
فارسی
