비금속 스트랜드 루즈튜브 케이블
기프티 Current cable
A non-armored outdoor cable with an FRP central strength member, stranded loose tubes and a PE jacket. Supported aerial use needs its own support review; this is not an ADSS substitute.
OUTDOOR · STRANDED LOOSE TUBE
기프티비금속 스트랜드 루즈튜브 케이블
A non-armored outdoor cable with an FRP central strength member, stranded loose tubes and a PE jacket. Supported aerial use needs its own support review; this is not an ADSS substitute.
- Starting route
- Duct / supported routes
- 구성
- 광섬유, 구조 및 재킷을 확인하세요
- Order basis
- 승인된 사양 및 수용 기준
Not sure it fits? Start with your installation
Production knowledgeCable-making equipment experience.
One supplier contactPayment, acceptance and delivery.
A clear order basisDrawing, specification and agreed checks.
Start with where
케이블이 작동할 것입니다.
Select a starting point to see what needs to be confirmed for your project.
WHAT TO CONFIRM
A few details make the choice clearer.
Select your route to see the questions that matter for this cable.
- Installation method and mechanical loads
- Fiber type, count and network requirements
- 재킷, 보호 및 승인 기준
Every layer has a purpose.
Review the cable components, then confirm the drawing for the configuration you intend to order.
승인된 케이블 도면은 최종 치수와 재질을 규정한다.
Loose tubes and fillers
Optical tubes are stranded around the central member.
컨텍스트가 포함된 사양.
이 참조 자료를 사용하여 요구사항을 정의하십시오. 견적서 및 승인된 케이블 데이터시트가 공급되는 제품을 규정합니다.
GYFTY non-metallic-center market example
초기 비교용으로 게시된 시공 사례이며, 공급 정격을 보장하지 않습니다.
- Published count range
- 2–192 fibersThe cited construction uses an FRP central strength member.
- Example outside diameters
- 10.6–16.8 mmSeveral load-bearing constructions are listed; count alone does not set diameter.
Sources & scope
Public technical references checked September 2026. Manufacturer examples illustrate a construction; they do not identify HONGKAI’s source factory or establish the specification of your order.
Optical selection reference
If your selected fiber is G.652.D
- 1310–1625 nm
- ≤ 0.40 dB/kmG.652.D cable-attribute reference in ITU-T G.652 (08/2024), Table 2.
- 1530–1565 nm
- ≤ 0.30 dB/kmIncludes 1550 nm. These are standard limits, not a HONGKAI batch test result.
G.652 attenuation limits are not a blanket specification for short indoor cables, jumpers or drop cables. Fiber bending performance also does not determine the minimum bend radius of a finished cable.
Sources & scope
Public technical references checked September 2026. Manufacturer examples illustrate a construction; they do not identify HONGKAI’s source factory or establish the specification of your order.
Compare the construction.
Then narrow your shortlist.
Keep the route and protection requirements in view when you compare cable families.
Stranded loose-tube cable with aluminium tape
GYTA
A stranded loose-tube construction with a central steel strength member, aluminium-polyethylene laminate and a PE sheath. Aluminium moisture protection is not the same as steel-tape armor.
Steel-tape stranded loose-tube cable
GYTS
A stranded outdoor construction with a central steel strength member, steel-tape protection and a PE jacket. Review the fiber grouping and mechanical requirements for the route.
HONGKAI equipment in customer factories.
See our equipment at work in real cable factories. Some of our equipment customers also manufacture the finished cables supplied through HONGKAI.
Tight-buffer production
HK-30 extrusion, cooling and take-up equipment in a customer factory.
재생을 누르면 YouTube를 로드합니다.YouTube에서 시청
작동 환경에서 장비를 확인하려면 공정을 선택하세요.
이 영상들은 장비 적용 사례를 보여주며, 본 제품에 대한 배치 검사 기록은 아닙니다. 귀하의 주문에 대해 제조 출처 및 수락 요구사항이 확인되었습니다.
완성 케이블 주문에 대한 원스톱 파트너.
HONGKAI connects cable-making equipment experience with finished-cable supply. Work with us on your requirement, then keep payment, acceptance inspection and delivery with HONGKAI.
케이블 선택에 대한 생산 관점
당사의 장비 사업은 케이블 논의에 실용적인 출발점을 제공합니다. 즉, 광섬유, 보강재, 보호층 및 재킷이 요구되는 구조에 어떻게 적합한지입니다.
공급업체와의 직접적인 관계
HONGKAI is your customer-facing supplier. In our usual supply arrangement, you pay HONGKAI, and we handle acceptance inspection and delivery.
수락을 위한 합의된 기준
주문서에 케이블 도면, 사양, 검사 범위 및 필요한 기록을 명시하여 공급품이 귀하와 합의된 요구사항에 따라 평가되도록 하십시오.
완성 케이블은 누가 제조합니까?
Independent factories in China that use HONGKAI cable-making equipment. HONGKAI is the supplier, not the finished-cable manufacturer; the actual manufacturing source is confirmed for your order.
제품 승인을 결정하는 요소는 무엇입니까?
합의된 케이블 사양, 검사 범위 및 주문 기록. HONGKAI 장비를 사용하는 것은 생산 관계이지 완제품 인증이 아닙니다.
자체 케이블 생산을 계획하고 계신가요?
HONGKAI also supplies cable-making equipment and production-project support. Start from the cable drawing, materials and production requirements.
Why source finished cable through HONGKAI?
HONGKAI combines cable-making equipment experience with customer-facing supply responsibility. Some of our equipment customers also manufacture finished cables supplied through HONGKAI. You work with HONGKAI on your requirement, payment, agreed acceptance inspection and delivery. The actual manufacturing source and specification are confirmed for your order.
How do I know whether GYFTY fits my project?
A non-armored outdoor cable with an FRP central strength member, stranded loose tubes and a PE jacket. Supported aerial use needs its own support review; this is not an ADSS substitute. Share your route, quantity, destination and any drawing or customer specification so the configuration can be reviewed.
Is HONGKAI the manufacturer of this finished cable?
HONGKAI supplies finished fiber optic cables and handles payment, acceptance inspection and delivery. The cables are manufactured by independent factories in China using HONGKAI cable-making equipment. The actual manufacturing source and acceptance requirements are confirmed for each order.
누가 대금을 수령하고 검수 및 납품을 처리합니까?
For finished cable orders, HONGKAI receives payment and handles acceptance inspection and delivery. The actual manufacturer, specification and acceptance requirements are confirmed for your order.
모델이나 사양을 모를 경우 어떻게 해야 하나요?
모델을 선택하지 않고 문의할 수 있습니다. 경로, 예정된 연결부, 대략적인 수량 또는 도면을 보내 주십시오. 당사가 선정에 필요한 정보를 파악하는 데 도움을 드리겠습니다.
Can HONGKAI also help with cable-making equipment?
Yes. HONGKAI also supplies cable-making equipment and production-project support. The equipment configuration follows your cable drawing, materials and production requirements.
Tell us about
your project.
A route, a drawing or a question is enough to start. You do not need to know the cable model.
Or email peterhe@hkcablemachine.com. For finished cable orders, HONGKAI receives payment and handles acceptance inspection and delivery. The actual manufacturer, specification and acceptance requirements are confirmed for your order.
