CABLE MACHINERY
PRODUCTS & PRODUCTION
제작하려는 케이블부터 시작하세요.
HONGKAI 기계 장비의 교체 부품.
공장을 완전히 계획하고 계십니까?
제품, 생산 라인 및 자재 요구사항을 연결하세요.
COMPLETE FACTORY SOLUTIONS
완전한 케이블 라인, 자재, 레이아웃 및 시운전 지원.
케이블 제조, MPO 조립 및 최종 광학 테스트.
베이스 케이블, 커넥터 어셈블리, 폴리싱 및 출하.
네트워크 케이블용 장비 선정 및 공정 계획.
투자하기 전에 신중한 결정을 내리세요.
투자 입력 요소를 이해하세요
공정 연구를 검토하세요
트리플 트위스트와 더블 트위스트를 비교하세요
귀하의 제품이 출발점입니다.
해당 장비와 자재, 그리고 이를 중심으로 공장을 계획하세요.
OUTDOOR · CENTRAL LOOSE TUBE
A central loose-tube construction with steel-tape protection, parallel steel wires and a PE outer jacket. Start with your installation route, then confirm the mechanical and optical requirements.
Not sure it fits? Start with your installation
Select a starting point to see what needs to be confirmed for your project.
Select your route to see the questions that matter for this cable.
Review the cable components, then confirm the drawing for the configuration you intend to order.
Construction illustration. The approved cable drawing defines the final dimensions and materials.
Colored fibers sit inside the central loose tube.
이 참조 자료를 사용하여 요구사항을 정의하십시오. 견적서 및 승인된 케이블 데이터시트가 공급되는 제품을 규정합니다.
초기 비교용으로 게시된 시공 사례이며, 공급 정격을 보장하지 않습니다.
Public technical references checked September 2026. Manufacturer examples illustrate a construction; they do not identify HONGKAI’s source factory or establish the specification of your order.
G.652 attenuation limits are not a blanket specification for short indoor cables, jumpers or drop cables. Fiber bending performance also does not determine the minimum bend radius of a finished cable.
Public technical references checked September 2026. Manufacturer examples illustrate a construction; they do not identify HONGKAI’s source factory or establish the specification of your order.
Keep the route and protection requirements in view when you compare cable families.
Central loose-tube fiber optic cable
A central loose-tube construction with steel-tape protection, parallel steel wires and a PE outer jacket. Start with your installation route, then confirm the mechanical and optical requirements.
비금속 중앙 루즈튜브 케이블
A central loose-tube construction with two parallel FRP strength members and a PE outer sheath. Confirm route protection, loads and water-blocking requirements.
Non-armored central loose-tube cable
A central loose-tube cable with parallel steel-wire reinforcement and a PE jacket. Review the external route protection before selecting a non-armored construction.
See our equipment at work in real cable factories. Some of our equipment customers also manufacture the finished cables supplied through HONGKAI.
HK-30 extrusion, cooling and take-up equipment in a customer factory.
작동 환경에서 장비를 확인하려면 공정을 선택하세요.
이 영상들은 장비 적용 사례를 보여주며, 본 제품에 대한 배치 검사 기록은 아닙니다. 귀하의 주문에 대해 제조 출처 및 수락 요구사항이 확인되었습니다.
HONGKAI connects cable-making equipment experience with finished-cable supply. Work with us on your requirement, then keep payment, acceptance inspection and delivery with HONGKAI.
당사의 장비 사업은 케이블 논의에 실용적인 출발점을 제공합니다. 즉, 광섬유, 보강재, 보호층 및 재킷이 요구되는 구조에 어떻게 적합한지입니다.
HONGKAI is your customer-facing supplier. In our usual supply arrangement, you pay HONGKAI, and we handle acceptance inspection and delivery.
주문서에 케이블 도면, 사양, 검사 범위 및 필요한 기록을 명시하여 공급품이 귀하와 합의된 요구사항에 따라 평가되도록 하십시오.
Independent factories in China that use HONGKAI cable-making equipment. HONGKAI is the supplier, not the finished-cable manufacturer; the actual manufacturing source is confirmed for your order.
합의된 케이블 사양, 검사 범위 및 주문 기록. HONGKAI 장비를 사용하는 것은 생산 관계이지 완제품 인증이 아닙니다.
HONGKAI also supplies cable-making equipment and production-project support. Start from the cable drawing, materials and production requirements.
HONGKAI combines cable-making equipment experience with customer-facing supply responsibility. Some of our equipment customers also manufacture finished cables supplied through HONGKAI. You work with HONGKAI on your requirement, payment, agreed acceptance inspection and delivery. The actual manufacturing source and specification are confirmed for your order.
A central loose-tube construction with steel-tape protection, parallel steel wires and a PE outer jacket. Start with your installation route, then confirm the mechanical and optical requirements. Share your route, quantity, destination and any drawing or customer specification so the configuration can be reviewed.
HONGKAI supplies finished fiber optic cables and handles payment, acceptance inspection and delivery. The cables are manufactured by independent factories in China using HONGKAI cable-making equipment. The actual manufacturing source and acceptance requirements are confirmed for each order.
For finished cable orders, HONGKAI receives payment and handles acceptance inspection and delivery. The actual manufacturer, specification and acceptance requirements are confirmed for your order.
모델을 선택하지 않고 문의할 수 있습니다. 경로, 예정된 연결부, 대략적인 수량 또는 도면을 보내 주십시오. 당사가 선정에 필요한 정보를 파악하는 데 도움을 드리겠습니다.
Yes. HONGKAI also supplies cable-making equipment and production-project support. The equipment configuration follows your cable drawing, materials and production requirements.
A route, a drawing or a question is enough to start. You do not need to know the cable model.
Or email peterhe@hkcablemachine.com. For finished cable orders, HONGKAI receives payment and handles acceptance inspection and delivery. The actual manufacturer, specification and acceptance requirements are confirmed for your order.
