• بيت
  • عن
    • المنتجات والإنتاج

      اعثر على خطوتك الإنتاجية التالية.
      خطوط الإنتاج

      ابدأ بالكابل الذي تريد تصنيعه.

      كابل ألياف بصرية خارجي مع مكونات داخلية مكشوفة

      معدات تصنيع الكابلات الضوئية

      كابل LAN أزرق مع أزواج ملتوية مكشوفة

      معداتات كابل الزوج الملتوي

      موصل نحاسي بعزل أزرق

      ماكينات الأسلاك والكابلات المعزولة

      قطع الغيار والدعم

      قطع غيار لآلات HONGKAI.

      استكشف الأجزاء حسب خط الإنتاج

      تحقق من الصور واللوحات التعريفية وأرقام القطع

      أرسل تفاصيل الماكينة والصور والكمية

      الكابل والمواد

      استكشف هياكل الكابلات والمدخلات.

      مقطع عرضي لكابل الألياف البصرية الخارجي ومكوناته الداخلية

      تصفح أنواع كابلات الألياف البصرية

      حبيبات بوليمر بيضاء وسوداء مع ملعقة معدنية

      مواد إنتاج الكابلات الضوئية

  • مدونة
  • اتصال

آلة اللف المزدوج

تجميع مزدوج الالتواء للأسلاك النحاسية المسحوبة. Compare HK-500, HK-650 and HK-800 by wire diameter, conductor section, lay length and take-up requirements.

01

تجميع مزدوج الالتواء للأسلاك النحاسية المسحوبة

Bunch individual drawn wires into a conductor for the next cable-making process. Compare HK-500, HK-650 and HK-800 by incoming wire diameter, finished section, lay length and take-up requirements.

MODELSHK-500 / HK-650 / HK-800
PROCESS STEPبعد السحب؛ قبل عملية الكابل التالية
SELECT BYقطر السلك، المقطع، اللف، واللف النهائي

02

الموضع في خط إنتاجك

Double-twist bunching sits between wire preparation and the next cable process, such as core insulation. If you need to assemble insulated cores, review the single-twist or cage-stranding options below.

01Wire feedتأكيد المادة وعدد الأطراف والقطر الفردي.
02تجميع مزدوج الالتواءعيّن مقطع الموصل المطلوب والخطوة للنموذج المقترح.
03Next processقم بمطابقة مجموعة التجميع مع العزل أو تصنيع الكابل اللاحق.

تشمل التطبيقات الأسلاك النحاسية، والمعفّرة، والموشحة بالفضة، والمعزولة بالورنيش. يُرجى مشاركة نوع المادة وعدد الأسلاك وقطرها ليتم مطابقة ترتيب التغذية مع منتجكم.

كيفية عمل هذه العملية

The double-twist arrangement bunches prepared wires into the required conductor. Model selection ties the individual wire feed to the finished section, lay and take-up package. Compare a working point for that construction, alongside the catalogue reference limits.

كل سلك وارد
Define material or coating, wire count and individual diameter.
بناء الموصل
Agree section, lay length and direction, and any additional forming requirements.
Collection and output
Check reel dimensions and package weight against the next machine and the intended working output.
03

قارن بين نماذج الالتواء المزدوج

قارن أولاً بين نطاقات الأسلاك والموصلات، ثم تحقق من متطلبات طول اللف وامتصاص الشد. يعتمد الطراز النهائي على تركيب الموصل الكامل لديك.

معامل هونج كونج-500 HK-650 هونج كونج-800
Twisting section 0.073–4.0 mm² 0.80–6 mm² 1.0–10.0 mm²
قطر السلك الفردي 0.08–0.45 mm 0.12–0.64 mm 0.29–1.0 mm
Twisting distance 4.22–39.64 mm 14.86–60.24 mm 27.71–130.56 mm
السرعة الدورانية القصوى 2,200 rpm 1,800 rpm 1,200 rpm
Twisting direction Left or right Left or right Left or right
Need help choosing a model?

Share your conductor requirements with our team.

اسأل عن هذا الجهاز

Maximum rotation speed is a machine limit. Working speed and output depend on wire construction, lay length and take-up conditions.

04

كيفية اختيار ماكينة لموصلك

01 / INPUT

عرّف كل سلك وارد

حدد المادة أو الطلاء، وعدد الأسلاك وقطر كل سلك. القسم النهائي وحده لا يحدد ما إذا كان ترتيب التغذية مناسبًا.

02 / OUTPUT

حدد الموصل

Provide a construction drawing, target cross-section, lay length and lay direction. Include any compacting or surface requirements that the offer must address.

03 / PACKAGE

طابق وحدة التجميع مع خطك

State the reel dimensions, target package weight and the equipment that follows bunching. The collection arrangement is part of model selection, not an afterthought.

04 / VALIDATION

الاتفاق على نقطة التشغيل

Request a proposed working speed for your wire, lay and take-up combination. The maximum rotation speed does not by itself establish production output.

05

حدد الماكينة والمعدات الداعمة

يجب أن يغطي مقترحك الجهاز والتجهيزات المحيطة به والواجهات مع خطك الحالي.

  • النموذج المقترح ومواد السلك المؤكدة، وعدد الخيوط وقطر كل سلك على حدة؛;
  • the finished conductor construction, achievable lay range and expected operating speed for that construction;
  • تتضمن العرضة ترتيبات الدفع، الاستلام، الحركة العرضية والتوتر؛;
  • عناصر التحكم ووظائف انقطاع السلك أو إيقاف الطول المضمنة في التصميم المقترح؛;
  • حجم البكرة، مرافق المصنع، المساحة المطلوبة ونقاط التسليم أو القبول.

Adjustable take-up tension and automatic stop functions are available within this family. Confirm the functions and auxiliaries included in your selected configuration.

From your requirement to the agreed equipment

Use these review steps to compare proposals and agree responsibilities for this machine.

Define your requirement

Define material or coating, wire count and individual diameter. Agree section, lay length and direction, and any additional forming requirements. Identify whether this is a new line, an additional machine or an upgrade.

Review the configuration

Compare the proposed working range, included machines, tooling and reel interfaces. Record optional items and customer-side utilities before agreeing the quotation.

Agree the acceptance checks

Set the trial material, operating point and acceptance method for each incoming wire; conductor construction; collection and output. Identify which checks require samples or records and who provides them.

Plan delivery and handover

Confirm packing, delivery terms, site preparation and any agreed installation or training scope. Identify operating documents, maintenance information and the machine-specific spare-parts list.

06

Very fine wire bunching

For smaller individual wires, review the compact HK-HST-200/250/300 family on the fine-wire double-twist bunching page.

Insulated core lay-up

If the task is assembling already insulated cores rather than bunching bare wires, start with the آلة اللف المفردة الكابولية and confirm the cable structure.

Conductor or armour cage work

A larger conductor build or wire armour may call for a different-size آلة تجديل القفص. Share the number of bobbins and finished cable diameter before selecting that route.

07

Questions buyers ask before ordering

Can one HK-500, HK-650 or HK-800 cover every conductor within its catalog range?

No. The ranges help narrow the family, but the number of ends, wire finish, lay, take-up package and practical operating point must be checked together for each conductor drawing.

Does the maximum rotation speed equal my production speed?

No. Maximum rotation speed is a machine limit. A project-specific production estimate needs the proposed lay length, wire construction, take-up arrangement and operating conditions.

Can this machine twist insulated cores or apply wire armour?

Do not choose this conductor-bunching family from that description alone. Insulated-core lay-up and armour require a separate equipment review, including the cable cross-section and process route.

What should I send for an accurate quotation?

Send the wire or cable drawing, material, number and diameter of wires, required section and lay, take-up reel, target output and a photo or sample if available. State whether you need this machine only or an integrated line.

08

أخبرنا بما تحتاجه.

اطلب عرض سعر، أو تحقق من مواصفات، أو احصل على مساعدة في اختيار المعدات.

peterhe@hkcablemachine.com

معداتآلة اللف المزدوج

اطلب الاقتباس

سوف نقوم بالرد عليك خلال 24 ساعة!!!