सभी-डाइइलेक्ट्रिक स्व-समर्थित वायुमंडलीय केबल
एडीएसएस केबल Current cable
A stranded loose-tube aerial cable with an FRP center and aramid reinforcement. Span design, loading and the electrical environment determine the required cable and sheath.
AERIAL NETWORKS
एडीएसएस केबलसभी-डाइइलेक्ट्रिक स्व-समर्थित वायुमंडलीय केबल
A stranded loose-tube aerial cable with an FRP center and aramid reinforcement. Span design, loading and the electrical environment determine the required cable and sheath.
- Starting route
- खंभा / टावर मार्ग
- Configuration
- फाइबर, निर्माण और जैकेट की पुष्टि करें
- Order basis
- Approved specification and acceptance criteria
Not sure it fits? Start with your installation
Production knowledgeCable-making equipment experience.
One supplier contactPayment, acceptance and delivery.
A clear order basisDrawing, specification and agreed checks.
Start with where
the cable will run.
Select a starting point to see what needs to be confirmed for your project.
WHAT TO CONFIRM
A few details make the choice clearer.
Select your route to see the questions that matter for this cable.
- Installation method and mechanical loads
- Fiber type, count and network requirements
- Jacket, protection and acceptance criteria
Every layer has a purpose.
Review the cable components, then confirm the drawing for the configuration you intend to order.
अनुमोदित केबल ड्रॉइंग अंतिम आयामों और सामग्री को परिभाषित करती है।.
Stranded loose tubes
Optical tubes are assembled around an FRP center.
विशिष्टताएँ, संदर्भ के साथ।.
अपनी आवश्यकता को तैयार करने के लिए इन संदर्भों का उपयोग करें। कोटेशन और स्वीकृत केबल डेटाशीट आपूर्ति किए गए उत्पाद को परिभाषित करते हैं।.
ADSS design basis
प्रारंभिक तुलना के लिए प्रकाशित निर्माण उदाहरण, आपूर्ति रेटिंग्स की गारंटी नहीं।.
- Construction
- Dielectric center, loose tubes and aramid yarnवास्तविक ड्रॉइंग और शीथ चयन की पुष्टि करें।.
- Span and loading
- Calculate for the routeSpan, sag, wind, ice and electrical environment must be considered together.
Sources & scope
Public technical references checked September 2026. Manufacturer examples illustrate a construction; they do not identify HONGKAI’s source factory or establish the specification of your order.
Optical selection reference
If your selected fiber is G.652.D
- 1310–1625 nm
- ≤ 0.40 dB/kmG.652.D cable-attribute reference in ITU-T G.652 (08/2024), Table 2.
- 1530–1565 nm
- ≤ 0.30 dB/kmIncludes 1550 nm. These are standard limits, not a HONGKAI batch test result.
G.652 attenuation limits are not a blanket specification for short indoor cables, jumpers or drop cables. Fiber bending performance also does not determine the minimum bend radius of a finished cable.
Sources & scope
Public technical references checked September 2026. Manufacturer examples illustrate a construction; they do not identify HONGKAI’s source factory or establish the specification of your order.
Compare the construction.
Then narrow your shortlist.
Keep the route and protection requirements in view when you compare cable families.
दो-FRP एरियल फाइबर ऑप्टिक केबल
ASU / GYFFY
A compact aerial cable construction with a central PBT loose tube, two FRP strength members and a PE sheath. Span, loading and installation conditions define the required configuration.
Central-tube figure-8 aerial cable
GYXTC8S
A figure-8 aerial construction combining a central optical tube with a stranded-wire messenger. Specify the span, installation loads and metallic support requirements.
HONGKAI equipment in customer factories.
See our equipment at work in real cable factories. Some of our equipment customers also manufacture the finished cables supplied through HONGKAI.
Tight-buffer production
HK-30 extrusion, cooling and take-up equipment in a customer factory.
Loads YouTube when you press play.Watch on YouTube
कार्यरत वातावरण में उपकरण देखने के लिए एक प्रक्रिया चुनें।.
ये वीडियो उपकरण अनुप्रयोग दिखाते हैं, न कि इस उत्पाद के लिए बैच निरीक्षण रिकॉर्ड। आपके ऑर्डर के लिए विनिर्माण स्रोत और स्वीकृति आवश्यकताएँ पुष्टि की गई हैं।.
आपके तैयार केबल ऑर्डर के लिए एक साझेदार।.
HONGKAI connects cable-making equipment experience with finished-cable supply. Work with us on your requirement, then keep payment, acceptance inspection and delivery with HONGKAI.
केबल चयन पर एक उत्पादन दृष्टिकोण
हमारा उपकरण व्यवसाय केबल चर्चा को एक व्यावहारिक प्रारंभिक बिंदु प्रदान करता है: आवश्यक निर्माण के अनुसार फाइबर, प्रबलन, सुरक्षा और जैकेट कैसे फिट होते हैं।.
A direct relationship with your supplier
HONGKAI आपका ग्राहक-अभिमुखी आपूर्तिकर्ता है। हमारी सामान्य आपूर्ति व्यवस्था में, आप HONGKAI का भुगतान करते हैं, और हम स्वीकृति निरीक्षण एवं डिलीवरी का प्रबंधन करते हैं।.
An agreed basis for acceptance
Set the cable drawing, specification, inspection scope and required records in the order documents, so the supply is assessed against your agreed requirement.
Who makes the finished cable?
Independent factories in China that use HONGKAI cable-making equipment. HONGKAI is the supplier, not the finished-cable manufacturer; the actual manufacturing source is confirmed for your order.
उत्पाद स्वीकृति क्या स्थापित करती है?
सहमत केबल विशिष्टता, निरीक्षण क्षेत्र और ऑर्डर रिकॉर्ड। HONGKAI उपकरण का उपयोग एक उत्पादन संबंध है, न कि तैयार-उत्पाद प्रमाणन।.
Planning your own cable production?
HONGKAI also supplies cable-making equipment and production-project support. Start from the cable drawing, materials and production requirements.
HONGKAI के माध्यम से तैयार केबल क्यों स्रोतित करें?
HONGKAI combines cable-making equipment experience with customer-facing supply responsibility. Some of our equipment customers also manufacture finished cables supplied through HONGKAI. You work with HONGKAI on your requirement, payment, agreed acceptance inspection and delivery. The actual manufacturing source and specification are confirmed for your order.
How do I know whether ADSS Cable fits my project?
A stranded loose-tube aerial cable with an FRP center and aramid reinforcement. Span design, loading and the electrical environment determine the required cable and sheath. Share your route, quantity, destination and any drawing or customer specification so the configuration can be reviewed.
Is HONGKAI the manufacturer of this finished cable?
HONGKAI supplies finished fiber optic cables and handles payment, acceptance inspection and delivery. The cables are manufactured by independent factories in China using HONGKAI cable-making equipment. The actual manufacturing source and acceptance requirements are confirmed for each order.
Who receives payment and handles acceptance and delivery?
For finished cable orders, HONGKAI receives payment and handles acceptance inspection and delivery. The actual manufacturer, specification and acceptance requirements are confirmed for your order.
What if I do not know the model or specification?
You can enquire without selecting a model. Send the route, intended connection, approximate quantity or a drawing. We will help identify the information needed for selection.
Can HONGKAI also help with cable-making equipment?
Yes. HONGKAI also supplies cable-making equipment and production-project support. The equipment configuration follows your cable drawing, materials and production requirements.
Tell us about
your project.
A route, a drawing or a question is enough to start. You do not need to know the cable model.
Or email peterhe@hkcablemachine.com. For finished cable orders, HONGKAI receives payment and handles acceptance inspection and delivery. The actual manufacturer, specification and acceptance requirements are confirmed for your order.
