• বাড়ি
  • সম্পর্কিত
    • পণ্য ও উৎপাদন

      আপনার পরবর্তী উৎপাদন ধাপটি খুঁজুন।.
      উৎপাদন লাইনগুলি

      যে কেবলটি আপনি তৈরি করতে চান তা দিয়ে শুরু করুন।.

      বহিরাগত ফাইবার অপটিক কেবল, যার অভ্যন্তরীণ উপাদানগুলো উন্মুক্ত

      অপটিক্যাল কেবল উৎপাদনের সরঞ্জাম

      উন্মুক্ত টুইস্টেড পেয়ার সহ নীল LAN কেবল

      টুইস্টেড-পেয়ার কেবলের জন্য সরঞ্জাম

      নীল ইনসুলেশনযুক্ত তামার কন্ডাক্টর

      অন্তরিত তার ও কেবলের জন্য মেশিনপাতি

      স্পেয়ার পার্টস ও সাপোর্ট

      HONGKAI মেশিনারির জন্য প্রতিস্থাপনযোগ্য অংশ।.

      উৎপাদন লাইন অনুযায়ী পার্টস অনুসন্ধান করুন

      ছবি, নেমপ্লেট এবং পার্ট নম্বরগুলি পরীক্ষা করুন

      মেশিনের বিবরণ, ছবি এবং পরিমাণ পাঠান

      কেবল ও উপকরণ

      কেবল কাঠামো এবং ইনপুটগুলি অন্বেষণ করুন।.

      বহিঃস্থ ফাইবার অপটিক কেবলের ক্রস-সেকশন এবং অভ্যন্তরীণ উপাদানসমূহ

      ফাইবার অপটিক কেবলের ধরনগুলি ব্রাউজ করুন

      ধাতব চামচ সহ সাদা এবং কালো পলিমার পেলট

      অপটিক্যাল কেবল উৎপাদনের জন্য উপকরণ

  • ব্লগ
  • যোগাযোগ
GUIDE কেবল মেশিনারি সিদ্ধান্ত গাইড

কেবল কারখানার লেআউট: আপনার উৎপাদন রুট কি খাপ খাবে?

সরঞ্জামগুলির অবস্থান নির্ধারণের আগে প্রক্রিয়া রুট, রিল পরিবর্তন, উপাদান বাফার, ইউটিলিটি এবং সম্প্রসারণের চারপাশে একটি কেবল কারখানার লেআউট পরিকল্পনা করুন।.
HONGKAI শিথিং-লাইন 3D রেফারেন্স যাতে ধারণামূলক অপারেটিং-স্পেস জোন এবং প্রশ্ন রয়েছে: আপনার লাইন কি ফিট হবে?
Factory Layout

একটি কেবল কারখানার মালিকের জন্য একটি ভবন নির্বাচন বা উৎপাদন রুট যোগ করার ক্ষেত্রে, প্রথম বিন্যাস প্রশ্নটি দেয়ালের মধ্যে কতগুলো মেশিন ফিট হয় তা নয়। এটি হলো কি প্রস্তাবিত রুটের মাধ্যমে উপকরণ, রিল, অপারেটর এবং রক্ষণাবেক্ষণের কাজ পরিচালনা করতে প্রয়োজনীয় স্থান হারানো ছাড়াই চলাচল করতে পারবে কিনা।.

উৎপাদন লাইনের সংখ্যা এবং পণ্যের প্রয়োজনীয়তা বিবেচনা করে ক্যাবল কারখানার বিন্যাস শুরু করুন। এরপর শুধুমাত্র মেশিনগুলোর জায়গা নয়, বরং ব্যবহারযোগ্য ভবনের সাথে সরঞ্জাম, রিল পরিচালনার স্থান, স্টোরেজ এবং ইউটিলিটিগুলোর সামঞ্জস্য যাচাই করুন।.

একটি প্রাথমিক স্থান অনুমান এবং ইনস্টলেশনের জন্য প্রস্তুত বিন্যাস ভিন্ন উদ্দেশ্যে পরিবেশন করে। পরিমাপকৃত বিল্ডিং ড্রয়িং ছাড়া, সরবরাহকারী যন্ত্রপাতির বিন্যাস অনুমান করতে সাহায্য করতে পারে, কিন্তু অবস্থান চূড়ান্ত করার আগে দরজা, কলাম, প্রবেশাধিকার এবং সাইটের ইন্টারফেস নিশ্চিত করা প্রয়োজন।.

প্রোডাক্ট রুট দিয়ে শুরু করুন, ফ্লোর এরিয়া দিয়ে নয়

প্রথম ইনপুট হল গ্রাহকের পরিকল্পিত উৎপাদন, একটি খালি ফ্লোর প্ল্যান নয়। নিশ্চিত করুন পণ্য এবং আউটপুট প্রয়োজনীয়তা: ক্যাবল নির্মাণ, প্রাথমিক উপকরণ, প্রয়োজনীয় উৎপাদন ক্ষমতা এবং প্রকল্পের জন্য কতটি উৎপাদন লাইন প্রয়োজন। একটি বিদ্যমান কারখানাও চিহ্নিত করবে যে নতুন লাইনটি কোন প্রক্রিয়া বা ক্ষমতার সমস্যার সমাধান করতে যাচ্ছে।.

If there is no formal building drawing, HONGKAI can start with the selected equipment’s length, width and height and an approximate combined space envelope. That is a preliminary equipment-space estimate. It does not confirm that the machinery can be installed and operated in an unmeasured building.

একটি লাইনের মধ্যে ধারাবাহিক প্রক্রিয়াকরণকে লাইনগুলির মধ্যে স্থানান্তর থেকে আলাদা করুন। একটি ADSS রেফারেন্স রুট প্রস্তুত রঙিন ফাইবার দিয়ে শুরু করে, লুজ-টিউব উৎপাদন, SZ কোর স্ট্র্যান্ডিং এবং শিদিং হলো পৃথক ধাপ। মধ্যবর্তী টিউব এবং ক্যাবল-কোর প্যাকেজগুলোর জন্য তাদের নিজস্ব স্থানান্তর ও অপেক্ষার অবস্থানের প্রয়োজন হয়। এই উদাহরণটি প্রতিটি অপটিক্যাল ক্যাবল নির্মাণের রুট নয়।.

Conceptual ADSS layout-planning sequence from prepared fibers through loose-tube production, SZ core stranding and sheathing, with intermediate reel transfers.

প্রস্তুত ফাইবার ইনপুট সহ ADSS পরিকল্পনার উদাহরণ। চিত্রটি প্রক্রিয়ার ধাপগুলি এবং রিল ট্রান্সফারগুলিকে আলাদা করে; এটি কোনো মেশিন বিন্যাস, ক্ষমতা গণনা বা ভবনের চিত্র নয়।.

স্থান নির্ধারণের বিন্যাসে অগ্রসর হওয়ার আগে, আনুমানিক ভবনের তথ্যের পরিবর্তে যাচাইকৃত ব্যবহারযোগ্য মাত্রা এবং বাধাগুলো প্রতিস্থাপন করুন। ড্রয়িংটি উদ্ধৃত যন্ত্রপাতির সংশোধনীর সাথে যুক্ত রাখুন। ভবন একই থাকলেও ক্যাবলের গঠন, ইনপুট প্যাকেজ বা লাইনের সংখ্যা পরিবর্তন হলে স্থানের প্রয়োজনীয়তা পরিবর্তিত হতে পারে।.

ইকুইপমেন্ট স্থাপনের আগে ভবনের বাধাবিঘ্ন রেকর্ড করুন

মেশিনের মাত্রা নির্দেশ করে যে সরঞ্জামটি কোন জায়গা দখল করছে কিনা। এটি দেখায় না যে একটি রিল ভিতরে আনা, লোড করা, অপসারণ এবং স্থানান্তর করা সম্ভব কিনা, অথবা পার্শ্ববর্তী মেশিন ইনস্টল করার পরে সার্ভিস ডোর খোলা যাবে কিনা।.

In HONGKAI’s preliminary layout discussions, several spaces are easy for buyers to omit: loading and unloading reels, distances between machines, intermediate-product storage, raw-material storage, and office or personnel areas. These belong in the initial space discussion, not in leftover corners after the lines have been placed.

মেশিনের ফুটপ্রিন্ট, রিল-পরিবর্তনের এলাকা, সার্ভিস অ্যাক্সেস, কাঁচামাল ও মধ্যবর্তী রিল সংরক্ষণ এবং কর্মীদের জন্য স্থান—এগুলি পৃথক করে দেখানো একটি ধারণামূলক কেবল কারখানার ফ্লোর প্ল্যান।.

অপারেটিং-স্পেস কনসেপ্ট, স্কেল অনুযায়ী নয়। রঙিন জোনগুলো বিভিন্ন পরিকল্পনার প্রয়োজনীয়তা চিহ্নিত করে; এগুলো কোনো নির্দিষ্ট ক্লিয়ারেন্স মান নির্ধারণ করে না বা সাইট লেআউটের অনুমোদন দেয় না।.

Use clear bay dimensions rather than only advertised floor area. Mark columns, doors and loading access, and identify the source of each measurement. Review installation entry and floor requirements against the actual equipment; do not treat a sketch as confirmation of building suitability.

Layout input ক্রেতার যা প্রদান করা উচিত বা যা অনুরোধ করা উচিত যা যাচাই করা না হওয়া পর্যন্ত খোলা রাখতে হবে
Building ব্যবহারযোগ্য দৈর্ঘ্য, প্রস্থ, উচ্চতা, দরজা এবং বাধা পরীক্ষা করা হয়েছে ইকুইপমেন্ট এন্ট্রি, ফ্লোরের উপযোগিতা এবং অসমাধানকৃত সাইটের সীমাবদ্ধতা
যন্ত্রপাতি এবং ফাঁকা জায়গা নির্বাচিত যন্ত্রপাতির মাত্রা এবং প্রস্তাবিত অবস্থান কার্যকরী দূরত্ব, অপারেটিং অবস্থান এবং পরিষেবা প্রবেশ
Reel handling প্রকৃত রিলের আকার, লোডিং দিক এবং পরিচালনা পদ্ধতি প্রবেশ, লোডিং, অপসারণ এবং পরবর্তী ধাপের স্থানান্তরের স্থান
Material storage কাঁচামাল এবং প্রত্যাশিত মধ্যবর্তী প্যাকেজ প্রস্তাবিত উৎপাদনের জন্য অপেক্ষমাণ অবস্থান এবং স্টোরেজ ভলিউম
মানবসম্পদ এবং সহায়ক বিভাগ অফিস/ব্যক্তিগত এলাকা এবং প্রস্তাবিত চলাচলের পথ প্রবেশাধিকার সংঘাত এবং প্রযোজ্য সাইট পর্যালোচনা

কী জিজ্ঞাসা করবেন: প্রস্তাবিত লেআউটের কোন মাত্রাগুলো সরবরাহকৃত যন্ত্রপাতির মাত্রা, কোনগুলো সাইটে পরিমাপ করা হয়েছে এবং কোনগুলো এখনও অনুমান?

ফলাফলটি সরবরাহকৃত মেশিনের ফুটপ্রিন্টকে বৃহত্তর অপারেটিং এনভেলপ থেকে আলাদা করতে হবে। এখানে কোনো নির্দিষ্ট অ্যাসলে প্রস্থ, সরঞ্জামের ব্যবধান বা স্টোরেজ শতাংশ ধরে নেওয়া হয়নি।.

অর্ডার করার আগে সংক্ষিপ্ত এবং সরু ভবনগুলি পর্যালোচনা করুন

A short building and a narrow building need different reviews. A returned material path or back-to-back main-machine arrangement may be an option, but only when the actual equipment and cable route support it.

Discuss the building constraint before fixing the equipment configuration. In suitable HONGKAI arrangements, a turning wheel after the traction section can allow a 180-degree return toward the other side of the bay. That is a candidate layout change—not permission to fold an entire extrusion, cooling or stranding train into any available space.

প্রস্থের সীমাবদ্ধতার জন্য, উপযুক্ত প্রধান মেশিনগুলো পিঠামপিঠি করে স্থাপন করলে প্রস্তাবিত লাইনগুলোর জন্য জায়গা করা সহায়ক হতে পারে। রিল-লোডিংয়ের জায়গা, অপারেটরদের অবস্থান এবং রক্ষণাবেক্ষণের সুবিধা এখনও বাকি দিকগুলোতে কাজ করতে হবে। এই বিন্যাস এটি প্রমাণ করে না যে সকল সহায়ক যন্ত্রপাতি বা প্রতিটি উৎপাদন লাইন ফিট হবে।.

দুটি ধারণাগত ক্যাবল-ফ্যাক্টরি লেআউট বিকল্প: ট্রাকশনের পর একটি ছোট বে-এর জন্য 180-ডিগ্রি রিটার্ন এবং সরবরাহকারীর প্রবেশাধিকার বজায় রেখে মেশিনের পেছনে-পেছচে প্রধান যন্ত্রপাতি।.

Two engineering-review options, not to scale. The return path and back-to-back arrangement require confirmation for the selected equipment; no wheel size, bend radius or space-saving result is specified.

Ask the supplier to identify exactly which equipment position or path changes, then review the actual product, guide-wheel arrangement, handling, controls and access affected by that change. Keep unconfirmed items open on the revised drawing. Do not shorten a required processing section or improvise a cable bend to make a paper layout fit.

উৎপাদন, অপেক্ষা এবং মুক্তির সময় একটি রিলকে অনুসরণ করুন

Trace an actual process reel from take-up to its waiting location and then to the next pay-off. Include how it will be moved, not just an arrow between two machine icons. A reel that fits the take-up still needs a removal route and a compatible downstream input.

The number of intermediate reels depends on the product and intended output. In an outdoor optical-cable route with several loose tubes feeding a later stage, the loose-tube area can require more intermediate packages than a buyer first expects. This is a reason to review that product’s reel plan, not a fixed buffer quantity for all factories.

টেক-আপ থেকে চিহ্নিত অপেক্ষার স্থান হয়ে পরবর্তী পে-অফ পর্যন্ত কাল্পনিক ইন্টারমিডিয়েট-রিেল যাত্রা, যেখানে পণ্য এবং আউটপুট ব্যাফার নির্ধারণ করে।.

ইন্টারমিডিয়েট-রিপ্ল্যানিং ক্রম। প্রকৃত প্যাকেজের আকার, পরিমাণ, হ্যান্ডলিং এবং রিলিজ স্ট্যাটাস নিশ্চিত করুন; চিত্রিত রিলগুলি কোনো নির্ধারিত ইনভেন্টরি গণনা নয়।.

প্রদত্তটি ব্যবহার করুন পণ্যের মিশ্রণ এবং উৎপাদন সময়সূচী to identify what may wait between stages. Distinguish material ready for the next operation from material awaiting inspection or a decision. Keep those locations out of the default movement route.

রিল-ফ্লো চেকপয়েন্ট পরিকল্পনা চিত্র বা স্থানান্তর তালিকায় রেকর্ড করুন আইটেম বন্ধ করার আগে প্রয়োজনীয় প্রমাণ
টেক-আপ অপসারণ প্যাকেজের আকার, অপসারণের দিক এবং হ্যান্ডলিং পদ্ধতি আউটপুট-প্যাকেজ এবং সরঞ্জাম বিন্যাস
Intermediate waiting পণ্য, অবস্থা, পরিকল্পিত পরিমাণ এবং অবস্থান পণ্য মিক্স এবং উৎপাদন পরিকল্পনা; ডিফল্ট রিল সংখ্যা নেই
পরবর্তী ধাপের লোডিং পরবর্তী পেমেন্টের জন্য সামঞ্জস্যপূর্ণ প্যাকেজ এবং পদ্ধতি উপরের এবং নিচের ইন্টারফেস নিশ্চিত করা হয়েছে
Released output পরীক্ষার অবস্থা, প্যাকিং গন্তব্য এবং ডিসপ্যাচ পথ সম্মত চূড়ান্ত প্যাকেজিং এবং রিলিজ পরিকল্পনা

Where vehicles move reels, review their interaction with pedestrian activity. HSE’s workplace-transport guide discusses separating vehicle and pedestrian routes and assessing routes for the vehicles using them.1 এটি একটি উপকারী পর্যালোচনা নীতি, কোনো সাধারণ করিডোরের মাত্রা নয় অথবা নির্দিষ্ট কোনো ক্যাবল-ফ্যাক্টরি পরিকল্পনা স্থানীয় প্রয়োজনীয়তাগুলোর সাথে সামঞ্জস্যপূর্ণ বলে এমন কোনো বিবৃতি নয়।.

শুধুমাত্র বাণিজ্যিক সরঞ্জামের অবস্থান চিত্র থেকে যানবাহনের রুট প্ল্যান, জরুরি প্রবেশপথ এবং প্রযোজ্য সাইট-নিরাপত্তা পর্যালোচনা আলাদা রাখুন।.

উপকরণগুলিকে প্রকৃত লাইন বিন্যাসের সাথে সংযুক্ত করুন

For the selected equipment, HONGKAI provides the total equipment power and the project-specific water and air requirements. The factory must confirm the site provision at the intended connection points. Keep equipment demand, available supply and the party responsible for each connection in one interface schedule.

For electricity, distinguish total installed or rated power from the load during a particular production run. Equipment does not necessarily run at full load continuously, but that is not a reason to assume a lower-capacity site connection is adequate. Have the responsible electrical designer confirm supply and distribution capacity, starting conditions and appropriate headroom against the selected equipment.

Voltage must match the equipment supply requirements; it should not simply be made higher. Tell the supplier the site voltage and frequency early, especially when they differ from the proposed machine arrangement. A suitable transformer or adapted electrical configuration may be needed, but the final solution requires project confirmation.

Conceptual utility interface map pairing supplier requirements with factory provision for electrical voltage and capacity, recirculating cooling water, and compressed-air demand including future additions.

ইউটিলিটি দায়িত্ব ম্যাপ, এটি কোনো ওয়্যারিং বা পাইপিং ডায়াগ্রাম নয়। প্রকল্পের জন্য প্রকৃত রেটিং, সংযোগ বিন্দু এবং সরবরাহিত পরিসর নিশ্চিত করতে হবে।.

Cooling water in the described HONGKAI arrangements is generally recirculated. A customer-side external reservoir can be considered where suitable. Its location and cooling provision still need to match the equipment requirement; a pool alone is not a confirmed cooling-system design.

Compressed-air planning should account for the selected equipment count and the additions the buyer actually intends. Do not copy pressure, flow or supply values from an unrelated machine. Identify any additional process-specific services separately.

Locate cabinets, water equipment and service routes on the same drawing used to review reel and maintenance access. Before installation, reconcile the layout and utility schedules by equipment revision, including ইনস্টলেশন এবং কমিশনিংয়ের দায়িত্ব সরবরাহকৃত যন্ত্রপাতি এবং ক্লায়েন্ট-পক্ষের কাজের জন্য।.

আজকের কার্যক্রম বাধা ছাড়াই সম্প্রসারণের জন্য সংরক্ষণ করুন

Define the intended addition before marking a reserve area: another complete line, an extra module or a different product route. Their space and utility needs are not interchangeable. Empty floor space is only useful if the new equipment can be brought in, operated and connected without taking away necessary access.

In some HONGKAI configurations, an addition may extend the arrangement at the front or rear. Others may need an additional electrical cabinet or a different service provision. This is a case-by-case equipment review, not a promise that every line can be expanded within its existing envelope.

বর্তমান ও ভবিষ্যতের কেবল কারখানার ধারণাগত ওভারলে, যা একটি প্রবেশপথকে ভবিষ্যতের সাময়িক সরঞ্জাম অঞ্চল থেকে আলাদা রাখে এবং একটি ইলেকট্রিক্যাল-ইন্টারফেস পর্যালোচনা চিহ্নিত করে।.

এক্সপ্যানশন ওভারলে, স্কেল অনুসারে নয়। ভবিষ্যতের জোনটি প্রাথমিক; প্রকল্প পর্যালোচনার মাধ্যমে প্রকৃত মডিউল, অতিরিক্ত কেবিনেট, ইউটিলিটি এবং অ্যাক্সেস নিশ্চিত করতে হবে।.

Review the future material flow as well as the machine position. Identify whether the addition would consume reel-change space, intermediate storage, a service-removal path or the machinery delivery route. Mark the future equipment envelope as provisional until its requirements are known.

How to verify: Review the current and intended future routes on the same drawing. Identify shared access, material transfers and utility interfaces, then list any unresolved conflict with an owner and a decision date.

Keep a simple drawing-control record: product range and output basis, number of lines, equipment revision, building-measurement source, confirmed interfaces and unresolved items. Label a space estimate as a space estimate. Do not present it as an approved construction, electrical or safety drawing.

The buyer’s final planning decision should be explicit: the proposed route is supported by checked building and equipment information, or specified conditions remain unresolved. That is a more useful result than a dense drawing that hides assumptions behind neatly arranged machines.


  1. HSE, কর্মস্থলের পরিবহন নিরাপত্তা: একটি সংক্ষিপ্ত গাইড, pages 1–2, discusses pedestrian/vehicle segregation and traffic-route suitability. This UK guidance is cited for those general planning principles only; local requirements and the actual site’s risk review govern the project. No universal aisle width, lifting capacity or compliance claim is inferred. ↩

পরবর্তী পদক্ষেপ

আপনার লক্ষ্য কেবল, উৎপাদন ক্ষমতা এবং কারখানার অবস্থা পাঠান। আমরা উদ্ধৃতির আগে যা যাচাই করা দরকার তা নিশ্চিত করব।.

আপনার প্রকল্প নিয়ে আলোচনা করুন এই গাইড প্রিন্ট করুন
প্রকল্পের যোগাযোগ

আন্তর্জাতিক বিক্রয় এবং প্রকল্প পরিচালক

নিবন্ধ পদ্ধতি
  • আন্তর্জাতিক ক্রেতাদের সাথে কেবল উৎপাদন লাইন প্রকল্প আলোচনা
  • সরবরাহকারীর প্রযুক্তিগত দলিল এবং ড্রয়িং পর্যালোচনা
  • কারখানার লেআউট, ইউটিলিটি এবং ক্ষমতা পরিকল্পনা
  • FAT, ডেলিভারি এবং কমিশনিং অভিজ্ঞতা
কন্টেন্ট ভিত্তি

HONGKAI প্রকল্পের কাজ থেকে প্রস্তুত। নিবন্ধটি প্রকাশের আগে চিত্র, মানদণ্ড এবং বাজারের বিবৃতি পুনরায় পরীক্ষা করা হয়।.

একটি প্রকল্প শুরু করুন

আপনার কেবল স্পেসিফিকেশন পাঠান

আমাদের লক্ষ্য কেবল, উৎপাদন ক্ষমতা, কারখানার অবস্থা এবং বর্তমান সরঞ্জামের পরিসর বলুন। আমরা একটি উদ্ধৃতি দেওয়ার আগে কী যাচাই করা দরকার তা নিশ্চিত করব—শুধুমাত্র মূল্যের তালিকা পাঠাব না।.

এক কার্যদিবসের মধ্যে উত্তর দিন
শেনজেন এবং ডংগুয়ান, চীন

কেবল উৎপাদন নোট

কেবল ম্যানুফ্যাকচারিং, সরঞ্জাম নির্বাচন এবং সমস্যা সমাধান সম্পর্কে আমার মাসিক নোটস এবং HONGKAI উৎপাদন লাইন সম্পর্কে কখনও কখনও আপডেট পান।

উদ্ধৃতি জন্য জিজ্ঞাসা করুন

আমরা আপনাকে 24 ঘন্টার মধ্যে উত্তর দেব!!!