Wire Annealing and Tinning Machine
Prepare annealed and tinned wire after drawing. Specify annealing and surface tinning when the conductor design requires that wire condition and coating. This is a wire-finishing stage; the incoming wire is already drawn to size.
Prepare annealed and tinned wire after drawing
Specify annealing and surface tinning when the conductor design requires that wire condition and coating. This is a wire-finishing stage; the incoming wire is already drawn to size.
Position in your production line
Compare the selection references
Annealing and tinning family
Use the equipment family to establish the process fit.
Confirm the operating range
The quotation will define dimensions, operating values and equipment scope for your supplied construction.
The catalog identifies the annealing and tinning family. Wire count, operating range and power requirements are confirmed for the proposed model.
Select around your actual product
Incoming wire
Confirm material, diameter range and the number of ends to be processed.
Finished wire condition
Describe the annealed condition and acceptance criteria required by the conductor specification.
Tinning requirement
Supply the coating specification and surface acceptance criteria, together with a sample where available.
Output and handling
Define target line speed, pay-off/take-up packages, utilities and factory layout.
Define what your quotation includes
- Annealing and tinning equipment for the specified wire.
- Wire count and processing arrangement.
- Input and output handling and agreed controls.
- Utilities, layout and coating/wire-condition acceptance points.
State whether this is a new line, an additional machine or an upgrade. Include existing equipment interfaces so the offer covers the connections that matter.
Questions before choosing this machine
Does this machine replace the drawing stage?
The process described here follows drawing. Incoming wire should already have the specified diameter before its annealing and tinning requirements are addressed.
Can the same setup cover all wire sizes?
The diameter range, number of ends, coating requirement and operating speed must be checked together.
What sample is helpful for selection?
A wire sample and its written diameter, temper and coating requirements help define the finishing duty and acceptance method.
Tell us what you need.
Ask for a quotation, check a specification or get help selecting equipment.
EquipmentWire Annealing and Tinning Machine
English 
हिन्दी 
فارسی