HỒNG KAI

Nguyên liệu thô

bảng củanội dungcho trang này

không dễ để giới thiệu tất cả các khía cạnh của tất cả các tài liệu, vì vậy chúng tôi đã chuẩn bị rất nhiều thông tin trên trang này để bạn có thể tìm hiểu sâu hơn. Để có được thông tin bạn muốn một cách nhanh chóng, chúng tôi đã chuẩn bị thư mục nội dung này sẽ nhảy đến vị trí tương ứng khi bạn nhấp vào.

Sản phẩm vật liệu cáp

Băng thép/Băng nhôm

Thạch Thixotropic

Lõi sợi

Vật liệu vỏ nhựa

Thành viên sức mạnh cáp

CHẶN NƯỚCBĂNG DÁN

Băng chặn nước FIBER có đặc tính trương nở tuyệt vời. Khi nước thấm vào cáp được bảo vệ bằng băng chặn nước, bột siêu thấm bên trong băng sẽ ngay lập tức tạo thành gel chặn nước, ngăn ngừa hư hỏng cáp thêm và tốn kém hơn.

Water Blocking Tape – Technical Data

Units: Thickness in mm; Basis weight in g/m²; Tensile strength in N/cm; Swelling speed in mm/min; Swelling height in mm; Stability at 230 °C (short-term) and 90 °C (long-term); Moisture content (%).

Product Type	Thickness (mm)	Basis Weight (g/m²)	Tensile Strength (N/cm)	Elongation at Break (%)	Swelling Speed (mm/min)	Swelling Height (mm)	Thermal Stability	Moisture Content (%)
Standard Non-Conductive Tape (Nomin)	200 µm ±20 to 500 µm ±50	80 ±10 to 140 ±10	≥20 to ≥40	≥12	6 → 12	10 → 16	230 °C / 90 °C	≤9
Semi-Conductive Tape (Nomin/HTS)	300 µm ±30 to 600 µm ±40	120 ±10 to 190 ±20	≥30 → ≥60	≥12	8 → 14	12 → 18 (3 min)	230 °C / 90 °C	≤9
Non-Conductive Single-Layer (Star Materials)	0.15 ±0.03 to 0.30 ±0.03	60 ±5 to 90 ±10	≥25 → ≥35	≥12	5 → 12	8 → 16 (3 min)	230 °C / 90 °C	≤8
Non-Conductive Double-Layer (Star Materials)	0.20 ±0.03 to 0.50 ±0.03	70 ±10 to 130 ±10	≥25 → ≥50	≥10 → ≥12	6 → 12	9 → 16 (3 min)	230 °C / 90 °C	≤8

Data compiled from multiple manufacturer datasheets, including Nomin [oai_citation:0‡Cable Wrapping and Filling Materials |](https://nmcablematerial.com/nomin-water-blocking-tape-and-yarn-for-cable/?utm_source=chatgpt.com), HTS [oai_citation:1‡hts-cable.com](https://www.hts-cable.com/products/48-Semi-Conductive-Water-Blocking-Tape.html?utm_source=chatgpt.com), and Star Materials [oai_citation:2‡Star Materials](https://www.star-materials.com/non-conductive-single-layer-water-blocking-tape/?utm_source=chatgpt.com). Values reflect specification ranges across thickness and versions.

CHẶN NƯỚCSỢI

Sợi chặn nước FIBER được sử dụng trong cáp quang, cáp điện thoại đồng, cáp dữ liệu và cáp nguồn như các thành phần cáp. Sợi được sử dụng làm chất độn trong cáp nguồn để tạo ra khối áp suất chính và ngăn nước xâm nhập và di chuyển trong cáp quang sợi. Khi nước đi vào cáp được bảo vệ bằng sợi chặn nước, thành phần siêu thấm bên trong sợi ngay lập tức tạo thành gel chặn nước. Sợi sẽ nở ra gấp khoảng ba lần kích thước khô của nó.

Water Blocking Yarn – Product Data

Units: Denier (D), Linear Density (m/kg), Tensile Strength (N), Swelling Speed (ml/g/1 min), Swelling Capacity (ml/g), Elongation at Break (%). Data sourced from manufacturer datasheets.

Product / Type	Denier (D)	Linear Density (m/kg)	Tensile Strength (N)	Tốc độ sưng (ml/g/1 min)	Khả năng trương nở (ml/g)	Elongation at Break (%)	Source (Manufacturer)
ZS-series Polyester/SAP Yarn (ZS-1.0 to ZS-10.0)	9000–900 D	1000–10000	20–300	20–50	30–60	≥10	Nomin / Anbao / SAB-Hey collective data
Star Materials Water Blocking Yarn	1000–18000	9000–500	≥20–300	≥20–50	30–60	≥15	Star Materials datasheet
Fiber-Line Swellcoat® P-series (flat PET yarn)	N/A (flat yarn geometry)	~32777 m/kg etc.	~10.8 N (per lb yield)	—	45 g/g	—	Fiber-Line Swellcoat® data
Avient Swellcoat™ maximum absorbency	—	—	—	—	Up to 100× its weight	—	Avient product bulletin

Notes:
• ZS-series range reflects varying Denier/linear density/specs across models—values aggregated from multiple supplier datasheets.
• Swellcoat flat yarn uses g/g absorption rather than typical ml/g.
• “Up to 100× weight” absorption denotes exceptional maximum capacity available.
• Always refer to the specific supplier datasheet for precise numbers on a given batch/spec.

SAFCHẶN NƯỚCSỢI

SAF Water-Blocking Yarn – Technical Data

Units: Denier (D); Dry / Wet Diameter (mm); Absorbency (g/g); Tensile Strength (N); Elongation at Break (%); Swelling Speed (ml/g/1 min); Typical Dry Diameter (mm).

Sản phẩm	Denier (D)	Dry Diameter (mm)	Absorbency (g/g)	Tensile Strength (N)	Elongation at Break (%)	Swelling Speed (ml/g/1 min)	Ghi chú
SY-04500 (SAF/Polyester blend)	4500	—	43 (min) / 21.5 g/m	—	12 %	—	Rapidly absorbent superabsorbent yarn for cable applications
Various Denier Grades (AMEFIRD)	500, 900, 1800, 2000, 3000, 4500, 9000, 18000	0.055 – 2.000 (approx)	25–35 g/g (H grades), 20–25 g/g (UL grades)	≈496 N (500D) → ≈248 N (18000D)	≈15–20%	—	Provides breakdown by size: diameter, strength, elongation, absorbency
General SAF™ Yarn (Technical Absorbents / JGILI)	—	0.5–30 mm	Up to 200× its weight	High tensile strength	—	Up to 75 ml/g (1st min)	Lightweight, clean, rapid swelling yarn solution

Notes:
• SY-04500 values (absorbency, elongation) are minimum values based on product datasheet. [oai_citation:4‡techabsorbents.com](https://techabsorbents.com/us/product/absorbent-yarn-sy-04500/?utm_source=chatgpt.com)
• Amefird data distinguishes H and UL grades: higher absorbency and strengths vary across Denier sizes. Dry diameter, breaking strength, and elongation included. [oai_citation:5‡amefird.com](https://www.amefird.com/wp-content/uploads/2009/12/AE-CAMEL-YARN-2009.pdf?utm_source=chatgpt.com)
• General SAF™ yarn features include ultra-high absorption (up to 200×), fast swelling, and clean operation—ideal for cable voids and dry-blocking applications. [oai_citation:6‡techabsorbents.com](https://techabsorbents.com/us/cable-water-blocking-application/?utm_source=chatgpt.com) [oai_citation:7‡jgili.com](https://jgili.com/products/water-swellable-yarns-cords-and-ropes/?utm_source=chatgpt.com)

KẾT DÍNH POLYESTERSỢI

Sợi Polyester Binder Fiber được sử dụng làm vật liệu liên kết trong sản xuất cáp đồng và cáp quang.

Polyester Binder Yarn – Technical Data

Units: Denier (D) or dTex; Linear Density (m/kg or g/m); Breaking Strength (N); Elongation at Break (%); Shrinkage (% at specified temp); Special Features.

Manufacturer / Type	Denier / dTex	Mật độ tuyến tính	Sức mạnh phá vỡ (N)	Độ giãn dài (%)	Shrinkage (%)	Đặc trưng
Star Materials (Standard & Low Shrinkage)	1000 - 3000 D	1110 - 3330 tex (9000 - 3000 m/kg)	≥65 → ≥185	≥13 (Std), ≥22 (Low-shrink)	4-6% (Std), 0.5-1.5% (Low-shrink) at 177 °C, 10 min	High tenacity, low thermal shrinkage, dual-form available
LINKIA TEK (Standard / Low Shrinkage / Dual Low Shrinkage)	≈1110, 1670, 2220, 3330 dTex	—	≥65 → ≥190+	≥13 (Std), ≥22 (Low-shrink)	4.0–6.0% (Std), 0.5–1.5% (Low-shrink)	High strength, non-dampening, high heat resistance
Fibure (Ultra-Low Shrinkage)	≈1150, 1710, 2300 dTex	—	≥39, ≥69, ≥108 N	≥15	≤0.5% (190 °C/15 min)	Ultra-low shrink, dual-end, high speed binding
Roblon (LS / ULS Types)	1100–2200 dTex	9091–4545 m/kg	LS: 70–140 N; ULS: 75–150 N	≈20–21%	LS: up to 4.0%; ULS: 0.8–1.3%	High-grade polyester, dual-end spool, >4000 rpm

Notes:
• Star Materials data includes standard and low-shrinkage variants; values span 1000–3000 D. [oai_citation:0‡star-materials.com](https://www.star-materials.com/polyester-binder-yarn/?utm_source=chatgpt.com)
• LINKIA TEK provides both standard, low-shrinkage, and dual low-shrinkage types with similar performance specs. [oai_citation:1‡linkia-tek.com](https://linkia-tek.com/?a=index&aid=159&c=View&m=home&utm_source=chatgpt.com)
• Fibure offers ultra-low shrinkage binder yarns with shrinkage ≤ 0.5 %, and high tensile strength levels. [oai_citation:2‡fibure.com](https://fibure.com/products/polyester-binder-yarn?utm_source=chatgpt.com)
• Roblon supplies LS and ULS polyester binder yarns showing shrinkage < 2%, high strength, and capability for high-speed winding. [oai_citation:3‡roblon.dk](https://www.roblon.dk/Files/Files/Datablade/Fiber/Roblon_Binder_Yarn.pdf?utm_source=chatgpt.com)

THỦY TINHSỢI

Glass Yarn – Technical Data

Units: Linear Density (Tex); Tensile Strength (N); Elongation at Break (%); Swelling Speed (ml/g/min); Expansion Rate (ml/g); Moisture Content (%); Other Features.

Product / Type	Linear Density (Tex)	Tensile Strength (N)	Độ giãn dài (%)	Swelling Speed / Expansion	Moisture (%)	Features / Notes
E-Glass Water-Swelling Fiberglass Yarn	600 / 785 / 1200	>600 @ start; >96 @ 0.3%; >160 @ 0.5%; >320 @ 1%	1.7–3.0%	>1.5 ml/g/min; >2.0 ml/g expansion	<1.0%	High-modulus E-Glass for optical cable filling; waterproof coating option [oai_citation:0‡科学直通车](https://www.sciencedirect.com/topics/engineering/glass-yarn?utm_source=chatgpt.com)
High-Modulus Cable E-Glass Yarn	600 / 785 / 1200	>600 N	1.7–3.0%	>1.5 ml/g/min; >2.0 ml/g expansion	<1.0%	Water-blocking, high tensile, optical cable filling [oai_citation:1‡glpolygel.en.made-in-china.com](https://glpolygel.en.made-in-china.com/product/NwYtKsjbKFWo/China-Water-Blocking-High-Modulus-Cable-E-Glass-Yarn-Polyester-Binder-Yarn.html?utm_source=chatgpt.com)
Plain Texturized E-Glass Yarns	400±30, 600±40, 800±60, 1000±80, 1200±100, 2400±200, 5000±500	Not specified	Not specified	Not specified	Not specified	High insulation, resistance to heat/humidity/corrosion [oai_citation:2‡gteek.com](https://www.gteek.com/plain-texturized-e-glass-fiberglass-yarns?utm_source=chatgpt.com)
Fibure E-Glass Yarn	Not specified	Not specified	Not specified	Not specified	Not specified	ASTM D578-00 compliant, excellent insulation & fire resistance [oai_citation:3‡fibure.com](https://fibure.com/products/glass-yarn?utm_source=chatgpt.com)

Notes:
• First two rows are from the same source describing water-swelling, high-modulus E-Glass yarns in 600-1200 Tex options, with clear metrics on tensile strength, swelling and moisture [oai_citation:4‡glpolygel.en.made-in-china.com](https://glpolygel.en.made-in-china.com/product/DnUroqwAhHWe/China-600-785-1200-Tex-Optical-Cable-Fiberglass-Water-Swelling-Polyester-Binder-E-Glass-Yarn.html?utm_source=chatgpt.com).
• Texturized variants list a broader Tex range with key physical attributes but lack numerical mechanical data [oai_citation:5‡gteek.com](https://www.gteek.com/plain-texturized-e-glass-fiberglass-yarns?utm_source=chatgpt.com).
• Fibure yarns comply with ASTM D578-00 standard and are designed for thermal, electrical stability and fire resistance, though detailed specs are not publicly listed [oai_citation:6‡fibure.com](https://fibure.com/products/glass-yarn?utm_source=chatgpt.com).
• For accurate selection, please confirm with specific manufacturer datasheets for parameters like modulus, shrinkage, or coating specifics.

CHẶN NƯỚCARAMID SỢI

Với ứng dụng sợi Aramid chặn nước, các yêu cầu đặc biệt của cáp quang mềm trong nhà có thể được đáp ứng trong quá trình sản xuất.

Water Blocking Aramid Yarn – Technical Data

Units: Linear Density (Dtex or Denier); Linear Density (m/kg); Absorption Speed (ml/g/1 min); Absorption Capacity (ml/g/5 min); Moisture Content (%); Tensile Properties; Thermal / Fire Resistance.

Denier / Dtex	Linear Density (m/kg)	Absorption Speed (ml/g/1 min)	Absorption Capacity (ml/g/5 min)	Moisture Content (%)	Tensile / Modulus	Thermal / Fire Safety
1000 D	7550 ±10%	25	30	≤6	High modulus aramid; high tensile strength	Low shrinkage; high glass-transition temperature; non-conductive, corrosion resistant
1670 D	5500 ±10%	15	20	≤6	—	—
3000 D	2500 ±10%	20	25	≤3	—	—
~1500 D (approx)	—	—	8.0–15.0 g/g	—	Break Strength: ~200–600 N; Elongation: ~3 %	Modulus >75 GPa; Zero hot shrinkage

Notes:
- First three rows are based on aramid yarns from a specific supplier detailing 1000 D, 1670 D, and 3000 D variants with absorption speed, capacity, moisture, and density data. [oai_citation:0‡aoyuanyarn.com](https://www.aoyuanyarn.com/field_1/980786954874806272.html?utm_source=chatgpt.com)
- Fourth row reflects another product listing (approx. 1500 D) showing absorption in g/g, tensile strength, elongation, modulus, shrinkage properties. [oai_citation:1‡glpolygel.en.made-in-china.com](https://glpolygel.en.made-in-china.com/product/kaRpKOLMhhcn/China-1000d-Aramid-Yarn-Water-Blocking-Kevlar-Aramid-Fiber-Yarn-for-Optical-Cables.html?utm_source=chatgpt.com)
- Aramid yarn features include low density, high modulus, low shrinkage, corrosion resistance and high thermal stability—ideal for ADSS, non-metallic, and indoor optical fiber cable reinforcement. [oai_citation:2‡aoyuanyarn.com](https://www.aoyuanyarn.com/field_1/980786954874806272.html?utm_source=chatgpt.com) [oai_citation:3‡teijinaramid.com](https://www.teijinaramid.com/en/brochure/products/Twaron%C2%AE%20product%20brochure?utm_source=chatgpt.com)

KEVLAR

Kevlar Yarn – Technical Data

Units: Denier (D); Key Properties: Tensile Strength, Modulus, Elongation at Break, Shrinkage, Temperature & Environmental Resistance.

Grade / Type	Denier (D)	Tensile Strength & Modulus	Elongation at Break (%)	Shrinkage / Thermal Stability	Other Highlights
Kevlar® Para-Aramid (General)	200–7100	High strength-to-weight; very high modulus	Very low elongation	Extremely low thermal shrinkage	Heat/chemical resistance, non-conductive, 5× stronger than steel
Kevlar® T-29 (Standard Modulus)	Varies	Standard modulus level	Thấp	Near zero shrink	Balanced strength & flexibility
Kevlar® T-49 (High Modulus)	Varies	Higher modulus than T-29	Very low	Negligible shrinkage	For high-modulus applications
Kevlar® AP	Varies	~15% higher tenacity than T-29	Thấp	Very low	Enhanced strength
Kevlar® KM2	Varies	Optimized for ballistic performance	Thấp	Minimal	Superior impact resistance
Kevlar® 129 / 149 (High Tenacity)	Varies	Highest tenacity; 149 is strongest	Thấp	Very low	For ballistic/armor/aerospace use

Notes:
• Kevlar® is a para-aramid fiber with exceptional tensile strength-to-weight ratio—approximately five times stronger than steel per unit weight. It maintains strength at low thermal expansion and is highly heat, flame, and chemical resistant. [oai_citation:0‡dupont.co.uk](https://www.dupont.co.uk/fabrics-fibers-and-nonwovens/fiber-optics.html?utm_source=chatgpt.com)
• Common Denier grades range from 200 to 7100 D; key types include T-29 (standard modulus), T-49 (high modulus), AP (~15% higher tenacity), KM2 (ballistic), 129/149 (high tenacity) [oai_citation:1‡维基百科](https://en.wikipedia.org/wiki/Kevlar?utm_source=chatgpt.com) [oai_citation:2‡FIBER-LINE®](https://www.fiber-line.com/uploads/pdf%20US/fl.us.datasheet-kevlar-para-aramid.pdf?utm_source=chatgpt.com).
• Kevlar retains its strength at cryogenic temperatures; at elevated temperatures (≥150 °C), tensile strength reduces ~10–20% initially, and more over extended exposure. Minimal shrinkage due to low or negative thermal expansion coefficient. [oai_citation:3‡dupont.com](https://www.dupont.com/content/dam/dupont/amer/us/en/safety/public/documents/en/Kevlar_Technical_Guide_0319.pdf?utm_source=chatgpt.com) [oai_citation:4‡维基百科](https://en.wikipedia.org/wiki/Kevlar?utm_source=chatgpt.com).

PPCHẤT ĐỘN SỢI-PP

Sợi PP Filler FIBER được làm từ polypropylene. có độ bền kéo cao và đồng đều
phân phối lưới, có thể dùng để luồn cáp.

PP Filler Yarn – Technical Data

Units: Denier (D), Linear Density (g/m), Diameter (mm), Breaking Strength (g/D or N), Elongation (%), Heat Shrinkage (%), Heat Shrinkage Temperature (°C).

Product Type / Grade	Denier (D) or Density	Diameter (mm)	Breaking Strength (g/D)	Độ giãn dài (%)	Heat Shrinkage (%)	Ghi chú
Star Materials – Normal Grade	20,000–800,000 D	2–30	0.2–0.6	≥20	≤10 at 100 °C (1 min)	Low cost, suitable for large cables
Star Materials – High Grade	3,800–300,000 D	0.8–12	0.6–1.4	≥20	≤10 at 100 °C (1 min)	Uniform, no joints, lighter
Star Materials – Super Grade / Twisted	3,800–200,000 D (Super); up to 60,000 D (Twisted)	0.8–8 (Super); 0.8–5 (Twisted)	2.0–3.5 (Super); 2.3–3.8 (Twisted)	≥20	≤10 at 100 °C (1 min)	Virgin PP, best strength, twisted ensures diameter accuracy
HTS Cable – Standard PP Filler	2,000–30,000 D	—	Not specified (N)	≤15 (decreases)	≤2.5	Metrics given as running meter per kg etc.
Anshi / Longtai – PP Filler	4,000–240,000 D (expansion widths 10–40 mm)	Twisted diameter 0.5–6.0 mm	20–380 N	<20	≤6	High insulation, non-hygroscopic, smooth mesh texture

Notes:
• Star Materials grades: Normal (low cost), High (light & no joint), Super/Super Twisted (virgin PP, high strength). [oai_citation:0‡Shineworld -](https://www.shineworldgroup.com/product-item/pp-filler-yarn/?utm_source=chatgpt.com)
• HTS Telecom data provides linear density to meters per kg and shrinkage under heat. [oai_citation:1‡HTS电缆材料公司](https://www.hts-cable.com/products/68-PP-Filler-Yarn.html?utm_source=chatgpt.com)
• Anshi/Longtai offers expanded denier ranges, mesh-like structure, high tensile in N units. [oai_citation:2‡中国龙泰](https://chinalongtai.en.made-in-china.com/product/iSEQsobUZpVZ/China-Wire-Filler-Yarn-PP-Cable-Polypropylene-Filler-Yarn-ANSHI05-.html?utm_source=chatgpt.com)
• Longtai product pages also show typical filler strengths, elongation, shrinkage rates across ranges. [oai_citation:3‡Jiangxi Longtai New Material Co., Ltd](https://www.polypropylene-twine.com/sale-26112308-twine-polypropylene-cable-filler-yarn-9kd-300kd-for-wire-filling.html?utm_source=chatgpt.com)

DÂY RIPCORD

Ripcord chủ yếu được sử dụng để tước các loại cáp khác nhau. Nhìn chung, có hai màu bao gồm trắng và vàng.

Ripcord – Technical Data

Units & Terms: Break Strength (kg or N), Yield (m/kg), Diameter (mm), Absorption or Coating traits.

Product / Material	Break Strength	Yield (m/kg)	Nominal Diameter	Special Features
Fiber-Line® Wearcoat™ Kevlar (K1000)	~55 kg (≈540 N)	~2639 m/kg	~0.762 mm	Lubricated, flat/round geometry, easy under-armour ripping
Fiber-Line® Wearcoat™ Kevlar (K1500)	~91 kg (≈893 N)	~1679 m/kg	~0.905 mm	High strength, rapid ripping, abrasion-resistant
Fiber-Line® Repelcoat™ PET (P3000 HT)	~27 kg (≈265 N)	~2645 m/kg	~0.695 mm	Water-repellent coating, polyester base
Fiber-Line® Blockcoat™ Vectran® (V1420T)	~40 kg (≈393 N)	~6050 m/kg	~0.456 mm	Non-wicking Vectran core for minimal outgassing
FibrXL Ripo™ Series (Aramid)	≥300 N (1-ply, 1680 dtex)	160–190 g per 1000 m	0.4–0.8 mm	Water-blocking, abrasion-resistant, multiple plies variants
Polyester Ripcord (One World)	≥90–180 N	—	—	2000–3000 dtex; twisted with lubricated coating

Notes:
• Fiber-Line® ripcord data corresponds to K-series aramid cores with different coatings and strengths. K1000 (~55 kg) and K1500 (~91 kg).([turn0search2] [oai_citation:0‡owcable.com](https://www.owcable.com/ripcord-product/?utm_source=chatgpt.com), [turn0search10] [oai_citation:1‡FIBER-LINE®](https://www.fiber-line.com/en/products/ripcords?utm_source=chatgpt.com))
• FibrXL Ripo™ series (Aramid): e.g., 1680 dtex 1-ply delivers ≥300 N tensile, diameter ~0.4 mm, water-blocking or abrasion finishes.([turn0search8] [oai_citation:2‡FibrXL](https://fibrxl.com/wp-content/uploads/2020/07/FibrXL-PDS-performance-0720-DEF-Ripo.pdf?utm_source=chatgpt.com))
• Polyester ripcord data (One World): twisted high-strength polyester, 2000–3000 dtex, tensile ≥90–180 N.([turn0search14] [oai_citation:3‡owcable.com](https://www.owcable.com/ripcord-product/?utm_source=chatgpt.com))
• Ripcords are embedded under jackets for easy sheath removal. Typical materials include aramid (Kevlar), Vectran, PET, with coatings like lubrication, water-repellent, water-blocking.([turn0search2] [oai_citation:4‡FIBER-LINE®](https://www.fiber-line.com/uploads/pdf%20US/fl.us.datasheet-ripcords.pdf?utm_source=chatgpt.com), [turn0search1] [oai_citation:5‡avient.com](https://www.avient.com/products/fiber-line-engineered-fiber-solutions/fiber-line-engineered-fiber-products/ripcords-fiber-optic-cable?utm_source=chatgpt.com), [turn0search9] [oai_citation:6‡focenter.com](https://focenter.com/evaluation-of-fiber-optic-ripcord-designs-and-use-procedures-post?utm_source=chatgpt.com))
• In many cable designs, ripcords are built beneath the jacket to rip buffer tubes or binders. Denier often 1.5–2.5× binder denier for effective ripping.([turn0search4] [oai_citation:7‡Google Patents](https://patents.google.com/patent/US6813421B2/en?utm_source=chatgpt.com))

MẠ CROMTHÉPBĂNG DÁN

Băng thép mạ crôm sử dụng băng thép cán nguội chất lượng cao Baosteel và Shougang; Có độ bám dính sơn tuyệt vời, khả năng chịu nhiệt tuyệt vời, khả năng chống sunfua hóa tuyệt vời, khả năng chống ăn mòn dạng sợi tuyệt vời và khả năng chống kiềm tuyệt vời; Bề mặt nhẵn, không nhăn, quấn gọn gàng; Có thể sử dụng cho lớp bảo vệ cáp thông tin liên lạc, chống ẩm, lớp bọc thép và vật liệu đóng gói.

Chrome-Plated Steel Tape – Technical Data

Units: Width (mm); Steel thickness (mm); Coating thickness (mm); Tensile strength (MPa); Elongation at break (%); Peel strength (N/cm); Heat-seal strength (N/cm); Additional features.

Application / Type	Chiều rộng	Steel Thickness	Coating Thickness	Sức căng	Độ giãn dài khi đứt	Sức mạnh bóc vỏ	Heat-Seal Strength	Đặc trưng
ECCS Tape (general cable armor)	15–80 mm ±0.05	0.155 mm	0.055 mm (both sides)	≥310 N/mm² (≈310–420 MPa)	≥15%	≥6.13 N/cm	≥17.5 N/cm	High corrosion, crush, twist resistance; copolymer coating
Copolymer Coated Steel Tape (wide width)	15–405 mm	0.12–0.20 mm	0.04–0.60 mm	300–420 MPa	≥15%	≥6.13 N/cm	≥17.5 N/cm	Ethylene copolymer lamination, excellent adhesion, chemical resistant

Notes:
• ECCS (Electrolytic Chrome Coated Steel) tape used in armoring fiber-optic cables; typical width 15–80 mm, 155 µm steel, 55 µm coating, tensile ≥310 N/mm², elongation ≥15 % [oai_citation:0‡Alibaba](https://www.alibaba.com/product-detail/Electrolytic-Chrome-Coated-Steel-Tape-for_1601487318513.html?utm_source=chatgpt.com)
• Copolymer-coated variant available in wider reels (up to 405 mm), steel thickness 0.12–0.20 mm, coating 0.040–0.60 mm, tensile 300–420 MPa, peel ≥6.13 N/cm, heat-seal ≥17.5 N/cm [oai_citation:1‡上海金属](https://www.shanghaimetal.com/copolymer_coated_steel_tape_for_cable-192.htm?utm_source=chatgpt.com)
• Common in armored cables for protection against rodents, mechanical crush, corrosion; coating enables easy bonding with PE sheaths [oai_citation:2‡Eastmac Machinery Inc.](https://eastmacmc.com/products/copolymer-coated-eccs-armour-tape-for-cables-wrapping-and-shielding?utm_source=chatgpt.com) [oai_citation:3‡上海金属](https://www.shanghaimetal.com/copolymer_coated_steel_tape_for_cable-192.htm?utm_source=chatgpt.com).

COPOLYMETRÁNG BỌCBĂNG THÉP

1. Băng thép phủ copolymer được phủ nhựa copolymer axit etylen-acrylic (EAA) trên một hoặc cả hai mặt của băng thép mạ crom để đạt được độ bám dính nhất định và có màu xanh lá cây;
2. Mức độ tôi luyện là T1-T3;
3. Ngoại quan: thẳng, mịn, đồng đều, không có tạp chất, không có nếp nhăn và đốm hoa;

Copolymer Coated Steel Tape – Technical Data

Units: Width (mm); Steel Thickness (mm); Copolymer Thickness (mm); Tensile Strength (MPa); Elongation (%); Peel Strength (N/cm); Heat-Seal Strength (N/cm); Reel Length (m); Standards.

Đặc điểm kỹ thuật	Range / Value
Chiều rộng	15–405 (standard), up to 600–1100 mm custom
Steel Thickness	0.12–0.20 mm
Copolymer (EAA) Coating Thickness	Approx. 0.05 mm each side (single/double)
Total Thickness	0.17–0.25 mm overall
Sức căng	310–420 MPa
Độ giãn dài khi đứt	≥15–20%
Peel Strength (lamination)	≥6.13 N/cm
Heat-Seal Strength	≥17.5 N/cm
Reel Length	>2,100 m
Standards	ASTM, YD/T 723.3, ICEA S-66

Notes:
• Typical cable armoring variant (ECCS); used inside polyethylene jacket for moisture and mechanical protection. • Wall-mounted copolymer bonding ensures compatibility with LLDPE, MDPE, HDPE. – [oai_citation:0‡星辰材料](https://www.star-materials.com/copolymer-coated-steel-tape/?utm_source=chatgpt.com) • Vitahco lists thickness ~0.15 mm steel, coating ~0.05 mm, tensile ≥310 MPa, elongation ≥20 %, peel strength ≥6.13 N/cm. – [oai_citation:1‡Vitahco](https://www.vitahco.com/copolymer-coated-steel-tape?utm_source=chatgpt.com) • Width up to ~600–1100 mm per customization; tensile strength 300–420 MPa; peel ≥6.13 N/cm; heat-seal ≥17.5 N/cm. – [oai_citation:2‡kuayuecable.en.made-in-china.com](https://kuayuecable.en.made-in-china.com/product/lxMrJaUOvDWi/China-Copolymer-Coated-Steel-Tape-for-Cables-PPGL-ECCS-Tape-.html?utm_source=chatgpt.com) [oai_citation:3‡newcore.net.in](https://www.newcore.net.in/product/copolymer-coated-stainless-steel-tape-for-cable-armoring/index.html?utm_source=chatgpt.com) • WUXI SUDA notes total thickness 0.20–0.25 mm, chromium coating weight 0.08–0.34 g/m². – [oai_citation:4‡copolymercoatedaluminumtape.com](https://www.copolymercoatedaluminumtape.com/copolymer-coated-tape/copolymer-coated-steel-tape/eccs-for-sale.html?utm_source=chatgpt.com)

COPOLYME TRÁNG BỌCBĂNG NHÔM

1. Băng nhôm phủ copolymer được phủ một mặt hoặc cả hai mặt của dải nhôm nền bằng nhựa copolymer axit etylen-acrylic (EAA) để đạt được độ bám dính nhất định, có màu hoặc xanh lam;
2. Trạng thái hợp kim là O, số hiệu là 1145, 8011, v.v.;

Copolymer Coated Steel Tape – Technical Data

Units: Width (mm); Steel Thickness (mm); Copolymer Thickness (mm); Tensile Strength (MPa); Elongation (%); Peel Strength (N/cm); Heat-Seal Strength (N/cm); Reel Length (m); Standards.

Đặc điểm kỹ thuật	Range / Value
Chiều rộng	15–405 (standard), up to 600–1100 mm custom
Steel Thickness	0.12–0.20 mm
Copolymer (EAA) Coating Thickness	Approx. 0.05 mm each side (single/double)
Total Thickness	0.17–0.25 mm overall
Sức căng	310–420 MPa
Độ giãn dài khi đứt	≥15–20%
Peel Strength (lamination)	≥6.13 N/cm
Heat-Seal Strength	≥17.5 N/cm
Reel Length	>2,100 m
Standards	ASTM, YD/T 723.3, ICEA S-66

CÁPKEM

Ứng dụng

Được thiết kế đặc biệt để làm đầy vỏ bằng chất hút nước và keo dán cáp giãn nở. Nhiệt độ hoạt động tốt nhất của nó là nhiệt độ bình thường và khi nhiệt độ tăng, độ nhớt của nó sẽ giảm dần.

Khả năng tương thích

Thuốc có khả năng tương thích tốt với hầu hết các vật liệu polymer, vật liệu thép và nhôm. Tuy nhiên, chúng tôi khuyến cáo rằng tất cả các vật liệu polymer tiếp xúc với thuốc mỡ đều phải được kiểm tra khả năng tương thích.

Đặc trưng

Đây là keo dán cáp chống thấm nước, giãn nở, hấp thụ nước. Keo vẫn mềm ở nhiệt độ thấp -40℃ và không nhỏ giọt ở nhiệt độ cao 80℃. Tính chất lưu biến thích hợp cho quá trình chiết rót lạnh. Keo có sản lượng hydro rất thấp, không tách dầu, khả năng chống oxy hóa tuyệt vời và độ ổn định lâu dài.

Khả năng sản xuất

được thiết kế cho quá trình chiết rót lạnh để tránh hiện tượng rỗng do thuốc mỡ co lại.

Fiber Optic Cable Pulling Lubricant – Technical Data

Units/Terms: COF = Coefficient of Friction; Viscosity (cP); pH; % Solids; Appearance; Temp Range; Compatibility.

Product / Type	COF (typical)	Viscosity (cP)	pH	% Non-volatile Solids	Vẻ bề ngoài	Temp Range	Các tính năng chính
Polywater® F	~0.10	1 000–3 000	8.0–9.5	<5%	Orange-stringy liquid	–5 °C to 60 °C	GR-356-CORE compliant, wets PE jacket, slow-drying residual film
Techlube FO	Not specified	2000–35 000	Neutral (~7)	Not specified	Water-based pourable	Stability in flooded ducts	Biodegradable, non-toxic, sticks in wet/ flooded ducts
3M™ Wire Pulling Lubricant (WL-Series)	<0.11 (dynamic)	Not specified	6.5–8.5	2.5–3.5%	Translucent white gel	–7 °C to 44 °C	Low solids, non-staining, no wax/grease/silicone
Super Lube® SuperPull	Not specified	Not specified	Not specified	Not specified	Aqueous polymeric gel	–26 °C to 104 °C	Low COF, wide‐temp range, compatible with fiber jacketing

Notes:
• Polywater® F: High-performance, pourable lubricant for underground fiber optic pulls; COF ≈0.1 on MDPE in HDPE innerduct. Compatible with wide array of jackets and GR-356-CORE standard [oai_citation:0‡Polywater](https://www.polywater.com/en/technical-data-sheet/f-communications-lubricant-tds/?utm_source=chatgpt.com).
• Techlube FO: Water-based, biodegradable, stringy-cling lubricant ideal for long, wet or flooded duct pulling; viscosity 2 000–35 000 cP; neutral pH [oai_citation:1‡Power and Cables](https://www.powerandcables.com/wp-content/uploads/2017/07/Fibre-Optic-Cable-Pulling-Lubricant-TechLube-FO-Lubricant-For-Fibre-Optic-Cable-Pulling-min.pdf?utm_source=chatgpt.com).
• 3M WL-Series: Translucent white polymer gel; COF <0.11 dynamic (PVC jackets on PVC conduit at 200 lb/ft); pH 6.5–8.5; non-staining, easy cleanup [oai_citation:2‡3M 多媒体](https://multimedia.3m.com/mws/media/41334O/wl-wire-pulling-lubricant.pdf?utm_source=chatgpt.com).
• Super Lube® SuperPull: Aqueous gel compatible with fiber jackets; operates from –26 °C to 104 °C; low friction; no flash, safe for jackets [oai_citation:3‡Super Lube](https://www.super-lube.com/superpull-electrical-fiber-optic-pulling-compound-2?utm_source=chatgpt.com).

CHẤT XƠKEM

Ứng dụng

Nó được thiết kế đặc biệt cho sản xuất cáp ống rời tốc độ cao

Khả năng tương thích

Thuốc có khả năng tương thích tốt với sợi phủ nhựa acrylic và vật liệu polyme dùng cho cáp quang. Tuy nhiên, chúng tôi khuyến cáo rằng tất cả các vật liệu polyme tiếp xúc với thuốc mỡ đều phải được kiểm tra khả năng tương thích.

Đặc trưng

Đây là loại bột nhão sợi chống nước không nhớt, không silicon. Nó vẫn mềm ở nhiệt độ thấp -50℃ và không nhỏ giọt ở nhiệt độ cao 80℃. Tính lưu biến thích hợp cho quá trình chiết rót lạnh. Nó có thể ức chế sự phát triển của nấm mốc, sản xuất hydro cực thấp, không tách dầu và có khả năng chống oxy hóa tuyệt vời và ổn định lâu dài.

Khả năng sản xuất

được thiết kế cho quá trình chiết rót lạnh để tránh hiện tượng rỗng do thuốc mỡ co lại.

Fiber Optic Cable Pulling “Fiber Cream” – Technical Data

Units / Terms: Viscosity (cP); pH; Appearance; Drying Behavior; Temperature Resistance; Compatibility.

Sản phẩm	Viscosity (cP)	pH	Vẻ bề ngoài	Drying Behavior	Temp Resistance	Các tính năng chính
Greenlee CRM-1 “Fiber-Cream”	30,000–45,000	7.0–8.0	Light yellow cream	Dries slowly to thin, non-conductive, non-hardening film	Stable in heat and freezing	Adheres well, non-staining, easy cleanup, compatible with fiber jackets

Notes:
• Greenlee CRM-1 “Fiber-Cream” is formulated for fiber optic cable pulls, featuring a viscosity of 30,000–45,000 cP, neutral pH (7–8), and a light yellow gel-like appearance. It dries slowly into a thin, non-conductive, non-hardening film, remains stable under both cold and hot conditions, and ensures easy cleanup with no staining or residue. Compatible with all cable insulation types. [oai_citation:0‡globaltestsupply.com](https://www.globaltestsupply.com/product/greenlee-crm-1-cable-cream-cable-pulling-lubricant?srsltid=AfmBOoqlmUOosl6aw3OzhWHtITc9FcAIqLpFNiDAKAQuMINf1NpujVDP&utm_source=chatgpt.com)

CHẤT XƠ

Optical Fiber – Mechanical and Geometrical Data

Units/Terms: Core/Cladding/Coating diameter; Proof Test Stress; Young’s Modulus; Ultimate Tensile Strength; Operating Temp Range; Fiber Standards.

Tham số	Value / Range
Core Diameter	8–10 µm (single-mode)
Cladding Diameter	125 µm
Coating Diameter	200–250 µm
Proof Test Stress	~0.69 GPa (100 ksi); some fibers up to 1.2% strain (≈1.2 GPa)
Youth’s Modulus (E)	≈16.6 GPa (with coating); up to ≈69 GPa (bare fiber)
Ultimate Tensile Strength	~5.3 GPa (~750 ksi) median dynamic strength
Nhiệt độ hoạt động	–60 °C to +85 °C
Applicable Standards	ITU-T G.652, G.657, G.655

Notes:
• Single-mode optical fibers typically have a core diameter of 8–10 µm, cladding of 125 µm and coating around 200–250 µm [oai_citation:0‡电信顾问印度有限公司](https://www.tcil.net.in/tender/pdf/24a1025_1.pdf?utm_source=chatgpt.com).
• Proof test stress is about 100 ksi (~0.69 GPa); some fibers (e.g., G.652.D PureBand) withstand up to ~1.2% strain [oai_citation:1‡康宁](https://www.corning.com/media/worldwide/coc/documents/Fiber/SMF-28%20ULL.pdf?utm_source=chatgpt.com) [oai_citation:2‡Sumitomo Electric](https://global-sei.com/fttx/optical-fibers/pureband-pureaccess/?utm_source=chatgpt.com).
• Young’s modulus (E) measured (E×A) yields ~16.6 GPa with coating, up to ~69 GPa for bare fiber [oai_citation:3‡ResearchGate](https://www.researchgate.net/publication/221925175_Mechanical_Properties_of_Optical_Fibers?utm_source=chatgpt.com).
• Median dynamic tensile strength measured at 5.3 GPa (~750 ksi) after aging conditions [oai_citation:4‡普睿斯曼](https://www.prysmian.com/sites/default/files/business_markets/markets/downloads/datasheets/SMF---Single-Mode-Optical-Fiber-SSMF.pdf?utm_source=chatgpt.com).
• Operating temperature for typical fiber (e.g., Corning SMF-28 ULL) spans –60 °C to +85 °C [oai_citation:5‡康宁](https://www.corning.com/media/worldwide/coc/documents/Fiber/SMF-28%20ULL.pdf?utm_source=chatgpt.com).
• Relevant single-mode standards include ITU-T G.652 (most common), G.657 (bend-insensitive) and G.655 (non-zero dispersion-shifted) [oai_citation:6‡en.wikipedia.org](https://en.wikipedia.org/wiki/G.652?utm_source=chatgpt.com).

QUANG HỌCCÁPNHỰA

Optical Cable Plastic Sheath Materials – Technical Data

Parameters: Material Type; Key Properties; Typical Applications.

Vật liệu	Key Properties	Typical Applications
Polyethylene (PE: LDPE, MDPE, HDPE, XLPE)	Low cost; UV and chemical resistance; excellent dielectric; outdoor durability	Outdoor cable jacket, direct burial, overhead use
Low Smoke Zero Halogen (LSZH)	Flame retardant; low smoke; zero halogen emissions; oil resistance	Indoor use, fire-safe environments
Polyvinyl Chloride (PVC)	Good chemical/weather resistance; low cost; moderate flame resistance	General-purpose cable jacketing
Polyurethane (PU / TPU)	High abrasion resistance; chemical/oil resistance; flexible	Industrial or tactical applications
Cable Co-polymers (e.g., NBR/PVC blends, ETFE)	Specialized chemical and wear resistance	Harsh environment or specialty cable designs

Sources:
• Common sheathing materials include PE (LDPE, MDPE, HDPE, XLPE)—renowned for durability, outdoor UV resistance, and low cost [oai_citation:0‡keyfibre.com](https://www.keyfibre.com/en/types-of-sheaths-used-in-fibre-optic-cables/?utm_source=chatgpt.com) [oai_citation:1‡angreen.com](https://www.angreen.com/news/what-material-fiber-optic-cables-made-of.html?utm_source=chatgpt.com) [oai_citation:2‡farahipolymer.com](https://farahipolymer.com/fiber-optic-cable-materials/?utm_source=chatgpt.com).
• LSZH is valued for flame retardance and low smoke emissions, ideal for indoor safety-critical environments [oai_citation:3‡honecable.com](https://www.honecable.com/6-fiber-cable-outer-sheath-materials/?utm_source=chatgpt.com) [oai_citation:4‡angreen.com](https://www.angreen.com/fiber-optic-cable-material/?utm_source=chatgpt.com).
• PVC is widely used for general-purpose sheathing due to chemical/weather resistance and cost-effectiveness [oai_citation:5‡honecable.com](https://www.honecable.com/6-fiber-cable-outer-sheath-materials/?utm_source=chatgpt.com).
• PU and TPU offer superior abrasion and chemical resistance, used in demanding industrial or military cable applications [oai_citation:6‡angreen.com](https://www.angreen.com/news/what-material-fiber-optic-cables-made-of.html?utm_source=chatgpt.com).
• Specialized copolymers such as NBR/PVC blends and ETFE are applied for unique environmental or mechanical requirements [oai_citation:7‡keyfibre.com](https://www.keyfibre.com/en/types-of-sheaths-used-in-fibre-optic-cables/?utm_source=chatgpt.com).

VỎ BỌC VẬT LIỆU

Optical Cable Sheathing Materials – Technical Data

Parameters: Material; Key Attributes; Typical Use Cases.

Vật liệu	Key Attributes	Typical Use Cases
Polyethylene (PE: LDPE, MDPE, HDPE, XLPE)	Affordable; chemical & moisture resistant; UV stable; excellent dielectric; strong abrasion resistance	Outdoor cable jacket; direct-burial; aerial installations
Low Smoke Zero Halogen (LSZH)	Flame-retardant (UL94 V-0); low smoke emission; halogen-free; high tensile strength; abrasion & UV resistant	Indoor spaces; tunnels; data centers; fire-safe environments
Polyvinyl Chloride (PVC)	Good weather & chemical resistance; economical; moderate flame resistance; smooth finish	General-purpose jacketing; indoor/outdoor use where cost-sensitive
Polyurethane (PU / TPU)	Outstanding abrasion & oil resistance; highly flexible; suitable for harsh conditions	Industrial, tactical, or heavy-duty cable applications
Polyamide (PA), NBR/PVC blends, ETFE	Enhanced wear & chemical resistance; high-performance polymers	Specialized or extreme-environment cable designs

Sources:
• PE (LDPE, MDPE, HDPE, XLPE) offers cost-efficient, durable sheathing for outdoor fiber cable usage. [oai_citation:0‡owcable.com](https://www.owcable.com/technology/analysis-of-optical-cable-sheath-materials-all-round-protection-from-basic-to-special-applications/?utm_source=chatgpt.com)
• LSZH provides flame safety and reduced smoke/toxic emissions, meeting UL94 V-0 and IEC 60332 standards. [oai_citation:1‡angreen.com](https://www.angreen.com/lszh-optical-cable-material/?utm_source=chatgpt.com) [oai_citation:2‡keyfibre.com](https://www.keyfibre.com/en/types-of-sheaths-used-in-fibre-optic-cables/?utm_source=chatgpt.com)
• PVC combines chemical and weather resistance with cost effectiveness, commonly used in general cable applications. [oai_citation:3‡HOC](https://www.honecable.com/6-fiber-cable-outer-sheath-materials/?utm_source=chatgpt.com) [oai_citation:4‡keyfibre.com](https://www.keyfibre.com/en/types-of-sheaths-used-in-fibre-optic-cables/?utm_source=chatgpt.com)
• PU/TPU ensures mechanical resilience with flexibility, used in industrial or tactical scenarios. [oai_citation:5‡angreen.com](https://www.angreen.com/news/what-material-fiber-optic-cables-made-of.html?utm_source=chatgpt.com)
• Specialty polymers like PA, NBR/PVC blends, and ETFE achieve higher performance for demanding environments. [oai_citation:6‡keyfibre.com](https://www.keyfibre.com/en/types-of-sheaths-used-in-fibre-optic-cables/?utm_source=chatgpt.com) [oai_citation:7‡angreen.com](https://www.angreen.com/news/what-material-fiber-optic-cables-made-of.html?utm_source=chatgpt.com)

OFCTHÀNH VIÊN SỨC MẠNH

Mô đun đàn hồi và độ bền kéo cao, độ thẳng tốt và dung sai hẹp, lớp phủ phosphate đồng đều và dày.
bề mặt có thể được phủ phosphat hoặc kẽm.

Optical Cable Strength Member – Non-Yarn Components

Parameters: Material; Form; Function; Typical Use Cases.

Vật liệu	Form	Chức năng	Typical Use Cases
Steel Rod or Strand	Rod or strand	Provides high tensile strength and crush resistance	Armored outdoor cables; installations requiring rigid protection
Glass Fiber-Reinforced Plastic (FRP)	Pultruded rod	Non-metallic rigidity, dielectric property, crush resistance	All-dielectric cables; aerial and non-conductive applications
Central Dielectric Rod	Solid plastic rod (e.g., FRP)	Maintains cable geometry and prevents buckling	Loose-tube and tight-buffered cable constructions

Sources:
• Fiber optic cables often include steel rods as strength members to provide high tensile strength and protection against crush in rugged or armored environments. [oai_citation:0‡光纤销售网](https://www.fiberoptics4sale.com/blogs/archive-posts/95148166-fiber-optic-cable-tutorial?srsltid=AfmBOooJvjDpyufWHiRNIRDtgTw4AR2R92N_TUi84Pfs9Oei6pwgx5QB&utm_source=chatgpt.com)
• FRP (Fiberglass-Reinforced Plastic) rods offer a non-metallic, dielectric alternative for strength members, especially suitable for non-conductive or aerial cable designs; FRP advantages include high strength-to-weight, corrosion resistance, and long service life. [oai_citation:1‡HOC](https://www.honecable.com/frp-fiber-optic-cable-csm-materials/?utm_source=chatgpt.com) [oai_citation:2‡Yulong FRP New Material](https://yulongfrp.com/product/frp-strength-member/?utm_source=chatgpt.com)
• Central dielectric rods—often of FRP—are employed within loose-tube or tight-buffered cables to maintain structural integrity and prevent buckling. [oai_citation:3‡img-en.fs.com](https://img-en.fs.com/file/datasheet/bulk-fiber-cables.pdf?utm_source=chatgpt.com) [oai_citation:4‡光纤销售网](https://www.fiberoptics4sale.com/blogs/archive-posts/95148166-fiber-optic-cable-tutorial?srsltid=AfmBOooJvjDpyufWHiRNIRDtgTw4AR2R92N_TUi84Pfs9Oei6pwgx5QB&utm_source=chatgpt.com)

DÂY THÉPCHO OFC

Độ bền kéo và độ thẳng cao; bề mặt có thể được phosphat hóa hoặc mạ kẽm

Optical Cable Steel Wire Strength Member – Technical Data

Parameters: Configuration; Diameter; Tensile Strength (N); Use Case.

Configuration / Cable Type	Steel Wire Diameter	Sức căng	Typical Application
Standard Drop Cable	Approx. 1.0 mm	360 N (long-term); 1200 N (short-term)	FTTH subscriber drop installations
Outdoor Unitube Armored Cable	Two wires, 0.9 mm each	Max short-term tensile ~1500 N	Armored loose-tube outdoor environments

Data Summary:
• Drop Cable (FTTH): Incorporates a 1 mm steel wire strength member, providing 360 N tensile strength in long-term use, up to 1200 N for short-term pulls. [oai_citation:0‡亚马逊](https://www.amazon.com/Outdoor-Optical-G657A1-Single-Strength/dp/B07PPTFLR6?utm_source=chatgpt.com)
• Outdoor Unitube Armored Cable: Uses two parallel steel wires (0.9 mm dia each), offering up to 1500 N short-term tensile capacity. [oai_citation:1‡Molexces](https://www.molexces.com/webfoo/wp-content/uploads/AFOUN.pdf?utm_source=chatgpt.com)

Bạn đã sẵn sàng bắt đầu hành trình sản xuất cáp chưa?

Nhận tư vấn chuyên môn và giải pháp tùy chỉnh cho doanh nghiệp của bạn

Nguyên liệu thô

bảng củanội dungcho trang này

Sản phẩm vật liệu cáp

Băng thép/Băng nhôm

Thạch Thixotropic

Lõi sợi

Vật liệu vỏ nhựa

Thành viên sức mạnh cáp

CHẶN NƯỚCBĂNG DÁN

CHẶN NƯỚCSỢI

SAFCHẶN NƯỚCSỢI

KẾT DÍNH POLYESTERSỢI

THỦY TINHSỢI

CHẶN NƯỚCARAMID SỢI

KEVLAR

PPCHẤT ĐỘN SỢI-PP

DÂY RIPCORD

MẠ CROMTHÉPBĂNG DÁN

COPOLYMETRÁNG BỌCBĂNG THÉP

COPOLYME TRÁNG BỌCBĂNG NHÔM

CÁPKEM

Ứng dụng

Khả năng tương thích

Đặc trưng

Khả năng sản xuất

CHẤT XƠKEM

Ứng dụng

Khả năng tương thích

Đặc trưng

Khả năng sản xuất

CHẤT XƠ

QUANG HỌCCÁPNHỰA

VỎ BỌC VẬT LIỆU

OFCTHÀNH VIÊN SỨC MẠNH

DÂY THÉPCHO OFC

Bạn đã sẵn sàng bắt đầu hành trình sản xuất cáp chưa?

tôi làThực đơn

Yêu cầu báo giá

chúng tôi sẽ trả lời bạn trong vòng 24 giờ!!!