hongkai-3d-menu-button
Converse sobre seu projeto
01Selected production line

Linha de produção de cabos drop FTTH

O que esta linha de produção produz? The HK-50 coordinates optical-fiber payoff, two approved steel-wire or FRP strength members, jacket extrusion, cooling, measurement, traction and take-up for 1–2 fiber FTTH drop cable. An optional messenger-wire payoff supports self-supporting constructions. Final dimensions, materials and equipment arrangement follow the approved cable drawing.

Explore FTTH Cable Structure Ver configuração de referência
Line model
HK-50
Sistema de controle
IPC + PLC Control
Processo principal
Fiber & strength-member payoff → PVC/LSZH jacket extrusion → cooling & take-up
Faixa de cabos de referência
1–2 fiber butterfly drop cable · optional self-supporting messenger · project confirmation required
02Cable structure → HK-50 process

Open the FTTH drop cable and trace each layer to its HK-50 process.

Start with the complete 1–2 fiber flat-drop construction, open the reviewed structure, then select one layer to see the process and equipment modules it requires.

Interactive structure preview Reference FTTH flat-drop construction
Assembled FTTH drop cable showing the flat outer jacket, optical fiber and parallel strength members Exploded FTTH drop cable showing optical fibers, two parallel strength members and the flat outer jacket
The exploded spacing is illustrative. Final dimensions, materials and construction follow the approved cable drawing. Rendered interaction preview
The structure and equipment mapping shown here is a reference route. Fiber count, strength-member material, cable dimensions, extrusion tooling, line speed and final equipment scope are confirmed from the approved cable drawing and project requirements.
03 REFERENCE CONFIGURATION

Inspect the individual equipment behind one complete HK-50 line.

One HK-50 line completes the reference FTTH drop cable route. Select a cable structure above to open the primary equipment that handles it, then review the supporting devices in the same line.

SELECTED IN SECTION 02 Choose a reviewed cable structure above The matching individual equipment will open automatically in this section. ONE HK-50 LINE · DEVICE DETAIL
COMPLETE PRODUCTION-LINE OVERVIEW

One line completes the cable.

The whole-line image explains the process route only. The equipment explorer below identifies the individual device responsible for each selected cable structure.

Reference overview of the HONGKAI HK-50 FTTH drop cable production line
REFERENCE EQUIPMENT · 01 EQUIPMENT IMAGE
Equipment image unavailable The device information remains available below. Please retry the image or replace its URL in this widget.
SELECTED DEVICE Four-head fiber pay-off
MODULE 01 · OPTICAL FIBER INPUT

Four-head optical-fiber pay-off

Presents the project-confirmed optical fibers to the HK-50 through the required active heads at controlled tension before FTTH profile extrusion.

Supports process
Stage 01 · Optical-fiber input
Recebe
Project-confirmed optical fibers on the required active heads
Hands off to
Wire support device and FTTH profile tooling
Confirm before proposal
Fiber type, active heads, reel format and permitted tension range
REFERENCE EQUIPMENT · FINAL ARRANGEMENT PENDING The image shows the four-head fiber pay-off for the reference HK-50 route. Final active heads, reel format and tension settings follow the approved project configuration.
All nine devices belong to one reference HK-50 FTTH production line.

Fiber count, strength-member material, cable dimensions, extrusion tooling, operating speed, utilities and final equipment scope are confirmed from the approved cable drawing and project requirements. The material dryer/loader, chiller and surface-drying units remain project-confirmed auxiliaries and are not represented here with unrelated equipment images.

Review project responsibility  →

Four-head optical-fiber pay-off selected.

03B FTTH line process video

See the FTTH drop cable production line in operation.

This official HONGKAI video shows the end-to-end reference process for producing FTTH flat drop cable on one HK-50 line. It gives buyers a practical view of how fiber input, strength-member handling, profile extrusion and finished-cable collection work as one coordinated production route.

Continue to project responsibility Back to reference configuration
HONGKAI video · FTTH drop cable production line Watch on YouTube
Reference boundary: the video demonstrates an FTTH drop-cable production process, but it does not confirm the final equipment quantity, arrangement, capacity, interfaces, supplied scope, acceptance result or project performance. The approved cable drawing and project inputs determine the final configuration. If the player is unavailable, use "Watch on YouTube" above.
04 Project responsibility

Define the FTTH project boundary before the line is finalized.

The HK-50 route above is a reference configuration for one FTTH drop cable production line, not a contractual supply scope. Buyer, HONGKAI and joint responsibilities become final only in the approved technical proposal or agreement.

Scope status Engineering review required

Nothing below is treated as included, excluded, buyer-supplied or HONGKAI-supplied until it is confirmed in writing.

Responsibility matrix Review all three responsibility groups

Opening a group only reveals its details; it does not confirm scope.

Buyer prepares Buyer responsibility Project, product and site information for engineering review 4 items

Information HONGKAI must review before fixing the production route and reference equipment configuration.

  • Approved FTTH cable drawing, fiber count and finished dimensions A ser confirmado
  • Jacket compound, optical fiber and strength-member grades and formats A ser confirmado
  • Target output, reel range, factory utilities and available layout A ser confirmado
  • Existing equipment, testing requirements and line-interface information A ser confirmado
Defined in the written proposal HONGKAI responsibility Recommended configuration and quoted supply boundary 4 items

HONGKAI defines the recommended configuration and quoted supply boundary after reviewing the available project inputs.

  • Recommended HK-50 route, tooling and reference equipment configuration A ser confirmado
  • Quoted equipment, auxiliary systems and equipment-source boundary A ser confirmado
  • Required line interfaces, control coordination and preliminary layout A ser confirmado
  • Documentation, commissioning, training and after-sales scope stated in writing A ser confirmado
Confirmed together Joint confirmation Technical interfaces, acceptance and project coordination 4 items

Technical interfaces, acceptance and project coordination require written confirmation from both project teams.

  • Final FTTH construction, process route and equipment configuration A ser confirmado
  • Factory layout, responsibility split and site-readiness conditions A ser confirmado
  • Trial materials, acceptance criteria, test conditions and sampling method A ser confirmado
  • Delivery, installation, trial schedule, changes and final written sign-off A ser confirmado

05 Planning inputs

Confirm the inputs needed to configure the FTTH production line.

Select the planning topics you are ready to discuss during the first engineering review. A selection marks a review topic only; it does not approve a technical value, equipment quantity, material grade, performance target or supply scope.

Select the production-line planning topics to review
06 Reference & verification

Review the FTTH line evidence — and the decisions that remain open.

Use the finished-cable reference, complete HK-50 line view and mapped equipment to verify the one-line production route. These materials do not represent a final equipment list, layout, performance commitment or acceptance record.

Section 05 context carried forward FTTH flat-drop cable → structure-mapped equipment → one HK-50 production line

No planning topics selected yet. Return to Section 05 to add review priorities.

FTTH flat-drop cable cross-section and cutaway reference showing optical fiber, strength members and outer jacket
Product reference
Not final arrangement
Reference available

FTTH flat-drop cable construction reference

Reference view of the FTTH flat-drop cable structure. Final fiber count, strength-member material, jacket geometry and finished dimensions require the approved cable drawing.

These references explain one FTTH production route from cable structure to the mapped modules inside a complete HK-50 line. Final equipment quantity, sequence, dimensions, supply, performance and acceptance are defined only by the mutually approved technical agreement.

Product reference

FTTH flat-drop cable construction reference

1 of 3
06B HK-50 FTTH customer feedback

Customer perspectives on the HK-50 FTTH production route.

Feedback focuses on drop-cable structure, material inputs, connected equipment, workshop planning and the information needed to review the production-line scope.

07 Route FAQ

Clarify the FTTH route before requesting a proposal.

These answers explain the single-line HK-50 reference route, how cable structure changes its equipment modules, and what still requires project confirmation.

What FTTH cable construction is this reference line based on?

The displayed reference is a flat FTTH drop-cable construction with optical fiber or fibers, two parallel strength members and a profiled outer jacket. Fiber count, strength-member material, jacket compound, profile dimensions and marking must follow the approved cable drawing.

Can one HK-50 line complete the displayed FTTH cable?

The reference route is one continuous HK-50 line. It coordinates optical-fiber pay-off, strength-member pay-off and alignment, profile extrusion, post-extrusion routing, inspection, traction, accumulation and finished-cable take-up. Final quantities and arrangement remain project-specific.

Does every FTTH drop cable use the same three structural inputs?

No. Fiber count, strength-member type and jacket profile can change by cable specification. The structure map explains the function of each layer and its primary equipment relationship; it is not a universal construction or an automatically confirmed equipment list.

Which equipment may change when the cable structure changes?

Active fiber pay-off heads, tension control, strength-member pay-off and support devices, extrusion tooling, cooling route, inspection and traction interfaces, accumulator travel and take-up reel arrangement may all require review against the selected cable drawing.

Are the HK-50 line and equipment images the final supplied configuration?

No. They are reference images used to explain the line route and the role of individual modules. Final equipment quantities, arrangement, controls, utilities, safeguards and interfaces are confirmed only in the approved project-specific proposal or agreement.

What information is needed to confirm line speed and production capacity?

Please provide the cable drawing, product mix, material requirements, target output, expected stable line speed, reel sizes, factory space, available utilities and planned schedule. This reference page does not assume a standard capacity or guaranteed operating result.

What does the FTTH process video demonstrate?

The video is related process evidence for an FTTH drop-cable production route. It does not confirm the final machine arrangement, module quantity, project performance, FAT result, acceptance record or customer outcome for the configuration being reviewed on this page.

Are inspection, FAT, installation and training included?

Inspection points, FAT requirements, acceptance criteria, documentation, installation, commissioning, training, travel and on-site responsibility are project-scope items. Their exact content must be defined in the approved technical proposal and commercial agreement.

Final cable construction, performance, equipment, acceptance criteria and supply scope are defined only in the mutually approved technical and commercial agreement.

08 Investment enquiry

Plan your FTTH drop-cable production project.

Share the target FTTH construction, fiber count, strength-member material, jacket compound, planned output, reel format and factory conditions. HONGKAI will review the HK-50 process route, supporting devices, system interfaces and open technical items before preparing a project-specific proposal.

Current page context FTTH flat-drop cable · HK-50 single-line reference route This context accompanies the enquiry as a reference. It does not confirm the final equipment arrangement, capacity or supply scope. Planning inputs remain open · No equipment selection carried forward

What HONGKAI will review

Target cable plan
Construction, fiber count, finished dimensions and materials
Process route
HK-50 line plus the supporting devices required by the selected structure
Capacity target
Product mix, expected output, target speed and reel format
Factory conditions
Available space, utilities, existing equipment and testing needs
Project stage
Planning, budgeting, factory preparation or production expansion
Review status
Preliminary assessment · Technical confirmation required
What to prepare · 6 items
  • FTTH cable drawing, reference sample or target construction
  • Fiber count, finished dimensions and tolerance requirements
  • Strength-member type, material, size and spacing
  • Jacket compound, color, marking and packaging requirements
  • Target output, expected line speed and finished-reel format
  • Utilities, factory layout, testing needs and planned timeline

No complete specification yet? Share the available construction and current assumptions. Unconfirmed items can remain “To be confirmed”.

The information submitted here supports a preliminary technical review. Final equipment configuration, performance, price, delivery schedule and supply scope are confirmed only in an approved proposal or agreement.

Investment project brief

Fiber Optic Cable Production Project Brief

Tell us your planned cable products, target capacity and current investment stage. Partial information is welcome, and you may upload a cable drawing when available.

Arraste e solte os arquivos, Escolha os arquivos para fazer o upload
Allow the customer to upload available cable drawings, specifications or reference documents. Display the accepted file types and file-size limit configured in WPForms.
eu sou oCardápio

Peça um orçamento

responderemos dentro de 24 horas!!!