هونغكاي

مواد خام

طاولةمحتوياتلهذه الصفحة

ليس من السهل تقديم جميع جوانب جميع المواد، لذلك قمنا بإعداد الكثير من المعلومات في هذه الصفحة لتتمكن من التعمق فيها. للحصول على المعلومات التي تريدها بسرعة، قمنا بإعداد دليل المحتوى هذا الذي سينتقل إلى الموقع المقابل عند النقر عليه.

منتجات مواد الكابلات

شريط فولاذي/شريط ألومنيوم

هلام متغيرة الانسيابية

الألياف الأساسية

مواد التغليف البلاستيكية

عضو قوة الكابل

حجب المياهالشريط

تتميز أشرطة حجب المياه من الألياف بخاصية تورم ممتازة. عندما يدخل الماء إلى كابل محمي بشريط مانع للماء، فإن المسحوق فائق الامتصاص الموجود داخل الشريط يشكل على الفور جلًا مانعًا للماء. الذي يمنع المزيد من الضرر والأكثر تكلفة للكابل.

Water Blocking Tape – Technical Data

Units: Thickness in mm; Basis weight in g/m²; Tensile strength in N/cm; Swelling speed in mm/min; Swelling height in mm; Stability at 230 °C (short-term) and 90 °C (long-term); Moisture content (%).

Product Type	Thickness (mm)	Basis Weight (g/m²)	Tensile Strength (N/cm)	Elongation at Break (%)	Swelling Speed (mm/min)	Swelling Height (mm)	Thermal Stability	Moisture Content (%)
Standard Non-Conductive Tape (Nomin)	200 µm ±20 to 500 µm ±50	80 ±10 to 140 ±10	≥20 to ≥40	≥12	6 → 12	10 → 16	230 °C / 90 °C	≤9
Semi-Conductive Tape (Nomin/HTS)	300 µm ±30 to 600 µm ±40	120 ±10 to 190 ±20	≥30 → ≥60	≥12	8 → 14	12 → 18 (3 min)	230 °C / 90 °C	≤9
Non-Conductive Single-Layer (Star Materials)	0.15 ±0.03 to 0.30 ±0.03	60 ±5 to 90 ±10	≥25 → ≥35	≥12	5 → 12	8 → 16 (3 min)	230 °C / 90 °C	≤8
Non-Conductive Double-Layer (Star Materials)	0.20 ±0.03 to 0.50 ±0.03	70 ±10 to 130 ±10	≥25 → ≥50	≥10 → ≥12	6 → 12	9 → 16 (3 min)	230 °C / 90 °C	≤8

Data compiled from multiple manufacturer datasheets, including Nomin [oai_citation:0‡Cable Wrapping and Filling Materials |](https://nmcablematerial.com/nomin-water-blocking-tape-and-yarn-for-cable/?utm_source=chatgpt.com), HTS [oai_citation:1‡hts-cable.com](https://www.hts-cable.com/products/48-Semi-Conductive-Water-Blocking-Tape.html?utm_source=chatgpt.com), and Star Materials [oai_citation:2‡Star Materials](https://www.star-materials.com/non-conductive-single-layer-water-blocking-tape/?utm_source=chatgpt.com). Values reflect specification ranges across thickness and versions.

حجب المياهغزل

تُستخدم خيوط حجب المياه من FIBER في الهواتف الضوئية والنحاسية وكابلات البيانات وكابلات الطاقة كمكونات للكابلات. تُستخدم الخيوط كمواد حشو في كابلات الطاقة لتوفير كتلة ضغط أولية ولمنع دخول الماء وانتقاله في كابلات الألياف الضوئية. عندما يدخل الماء إلى كابل محمي بخيوط مانعة للماء، فإن المكون فائق الامتصاص داخل الخيوط يشكل على الفور جلًا مانعًا للماء. سوف ينتفخ الخيط إلى ما يقرب من ثلاثة أضعاف حجمه الجاف.

Water Blocking Yarn – Product Data

Units: Denier (D), Linear Density (m/kg), Tensile Strength (N), Swelling Speed (ml/g/1 min), Swelling Capacity (ml/g), Elongation at Break (%). Data sourced from manufacturer datasheets.

Product / Type	Denier (D)	Linear Density (m/kg)	Tensile Strength (N)	سرعة التورم (ml/g/1 min)	القدرة على التورم (ml/g)	Elongation at Break (%)	Source (Manufacturer)
ZS-series Polyester/SAP Yarn (ZS-1.0 to ZS-10.0)	9000–900 D	1000–10000	20–300	20–50	30–60	≥10	Nomin / Anbao / SAB-Hey collective data
Star Materials Water Blocking Yarn	1000–18000	9000–500	≥20–300	≥20–50	30–60	≥15	Star Materials datasheet
Fiber-Line Swellcoat® P-series (flat PET yarn)	N/A (flat yarn geometry)	~32777 m/kg etc.	~10.8 N (per lb yield)	—	45 g/g	—	Fiber-Line Swellcoat® data
Avient Swellcoat™ maximum absorbency	—	—	—	—	Up to 100× its weight	—	Avient product bulletin

Notes:
• ZS-series range reflects varying Denier/linear density/specs across models—values aggregated from multiple supplier datasheets.
• Swellcoat flat yarn uses g/g absorption rather than typical ml/g.
• “Up to 100× weight” absorption denotes exceptional maximum capacity available.
• Always refer to the specific supplier datasheet for precise numbers on a given batch/spec.

القوات المسلحة السودانيةحجب المياهغزل

SAF Water-Blocking Yarn – Technical Data

Units: Denier (D); Dry / Wet Diameter (mm); Absorbency (g/g); Tensile Strength (N); Elongation at Break (%); Swelling Speed (ml/g/1 min); Typical Dry Diameter (mm).

منتج	Denier (D)	Dry Diameter (mm)	Absorbency (g/g)	Tensile Strength (N)	Elongation at Break (%)	Swelling Speed (ml/g/1 min)	ملحوظات
SY-04500 (SAF/Polyester blend)	4500	—	43 (min) / 21.5 g/m	—	12 %	—	Rapidly absorbent superabsorbent yarn for cable applications
Various Denier Grades (AMEFIRD)	500, 900, 1800, 2000, 3000, 4500, 9000, 18000	0.055 – 2.000 (approx)	25–35 g/g (H grades), 20–25 g/g (UL grades)	≈496 N (500D) → ≈248 N (18000D)	≈15–20%	—	Provides breakdown by size: diameter, strength, elongation, absorbency
General SAF™ Yarn (Technical Absorbents / JGILI)	—	0.5–30 mm	Up to 200× its weight	High tensile strength	—	Up to 75 ml/g (1st min)	Lightweight, clean, rapid swelling yarn solution

Notes:
• SY-04500 values (absorbency, elongation) are minimum values based on product datasheet. [oai_citation:4‡techabsorbents.com](https://techabsorbents.com/us/product/absorbent-yarn-sy-04500/?utm_source=chatgpt.com)
• Amefird data distinguishes H and UL grades: higher absorbency and strengths vary across Denier sizes. Dry diameter, breaking strength, and elongation included. [oai_citation:5‡amefird.com](https://www.amefird.com/wp-content/uploads/2009/12/AE-CAMEL-YARN-2009.pdf?utm_source=chatgpt.com)
• General SAF™ yarn features include ultra-high absorption (up to 200×), fast swelling, and clean operation—ideal for cable voids and dry-blocking applications. [oai_citation:6‡techabsorbents.com](https://techabsorbents.com/us/cable-water-blocking-application/?utm_source=chatgpt.com) [oai_citation:7‡jgili.com](https://jgili.com/products/water-swellable-yarns-cords-and-ropes/?utm_source=chatgpt.com)

بوليستر بيندرغزل

يتم استخدام خيوط ربط البوليستر FIBER كمواد ربط في إنتاج الكابلات النحاسية والبصرية.

Polyester Binder Yarn – Technical Data

Units: Denier (D) or dTex; Linear Density (m/kg or g/m); Breaking Strength (N); Elongation at Break (%); Shrinkage (% at specified temp); Special Features.

Manufacturer / Type	Denier / dTex	الكثافة الخطي	قوة الكسر (ن)	استطالة (%)	Shrinkage (%)	سمات
Star Materials (Standard & Low Shrinkage)	1000 - 3000 D	1110 - 3330 tex (9000 - 3000 m/kg)	≥65 → ≥185	≥13 (Std), ≥22 (Low-shrink)	4-6% (Std), 0.5-1.5% (Low-shrink) at 177 °C, 10 min	High tenacity, low thermal shrinkage, dual-form available
LINKIA TEK (Standard / Low Shrinkage / Dual Low Shrinkage)	≈1110, 1670, 2220, 3330 dTex	—	≥65 → ≥190+	≥13 (Std), ≥22 (Low-shrink)	4.0–6.0% (Std), 0.5–1.5% (Low-shrink)	High strength, non-dampening, high heat resistance
Fibure (Ultra-Low Shrinkage)	≈1150, 1710, 2300 dTex	—	≥39, ≥69, ≥108 N	≥15	≤0.5% (190 °C/15 min)	Ultra-low shrink, dual-end, high speed binding
Roblon (LS / ULS Types)	1100–2200 dTex	9091–4545 m/kg	LS: 70–140 N; ULS: 75–150 N	≈20–21%	LS: up to 4.0%; ULS: 0.8–1.3%	High-grade polyester, dual-end spool, >4000 rpm

Notes:
• Star Materials data includes standard and low-shrinkage variants; values span 1000–3000 D. [oai_citation:0‡star-materials.com](https://www.star-materials.com/polyester-binder-yarn/?utm_source=chatgpt.com)
• LINKIA TEK provides both standard, low-shrinkage, and dual low-shrinkage types with similar performance specs. [oai_citation:1‡linkia-tek.com](https://linkia-tek.com/?a=index&aid=159&c=View&m=home&utm_source=chatgpt.com)
• Fibure offers ultra-low shrinkage binder yarns with shrinkage ≤ 0.5 %, and high tensile strength levels. [oai_citation:2‡fibure.com](https://fibure.com/products/polyester-binder-yarn?utm_source=chatgpt.com)
• Roblon supplies LS and ULS polyester binder yarns showing shrinkage < 2%, high strength, and capability for high-speed winding. [oai_citation:3‡roblon.dk](https://www.roblon.dk/Files/Files/Datablade/Fiber/Roblon_Binder_Yarn.pdf?utm_source=chatgpt.com)

زجاجغزل

Glass Yarn – Technical Data

Units: Linear Density (Tex); Tensile Strength (N); Elongation at Break (%); Swelling Speed (ml/g/min); Expansion Rate (ml/g); Moisture Content (%); Other Features.

Product / Type	Linear Density (Tex)	Tensile Strength (N)	استطالة (%)	Swelling Speed / Expansion	Moisture (%)	Features / Notes
E-Glass Water-Swelling Fiberglass Yarn	600 / 785 / 1200	>600 @ start; >96 @ 0.3%; >160 @ 0.5%; >320 @ 1%	1.7–3.0%	>1.5 ml/g/min; >2.0 ml/g expansion	<1.0%	High-modulus E-Glass for optical cable filling; waterproof coating option [oai_citation:0‡科学直通车](https://www.sciencedirect.com/topics/engineering/glass-yarn?utm_source=chatgpt.com)
High-Modulus Cable E-Glass Yarn	600 / 785 / 1200	>600 N	1.7–3.0%	>1.5 ml/g/min; >2.0 ml/g expansion	<1.0%	Water-blocking, high tensile, optical cable filling [oai_citation:1‡glpolygel.en.made-in-china.com](https://glpolygel.en.made-in-china.com/product/NwYtKsjbKFWo/China-Water-Blocking-High-Modulus-Cable-E-Glass-Yarn-Polyester-Binder-Yarn.html?utm_source=chatgpt.com)
Plain Texturized E-Glass Yarns	400±30, 600±40, 800±60, 1000±80, 1200±100, 2400±200, 5000±500	Not specified	Not specified	Not specified	Not specified	High insulation, resistance to heat/humidity/corrosion [oai_citation:2‡gteek.com](https://www.gteek.com/plain-texturized-e-glass-fiberglass-yarns?utm_source=chatgpt.com)
Fibure E-Glass Yarn	Not specified	Not specified	Not specified	Not specified	Not specified	ASTM D578-00 compliant, excellent insulation & fire resistance [oai_citation:3‡fibure.com](https://fibure.com/products/glass-yarn?utm_source=chatgpt.com)

Notes:
• First two rows are from the same source describing water-swelling, high-modulus E-Glass yarns in 600-1200 Tex options, with clear metrics on tensile strength, swelling and moisture [oai_citation:4‡glpolygel.en.made-in-china.com](https://glpolygel.en.made-in-china.com/product/DnUroqwAhHWe/China-600-785-1200-Tex-Optical-Cable-Fiberglass-Water-Swelling-Polyester-Binder-E-Glass-Yarn.html?utm_source=chatgpt.com).
• Texturized variants list a broader Tex range with key physical attributes but lack numerical mechanical data [oai_citation:5‡gteek.com](https://www.gteek.com/plain-texturized-e-glass-fiberglass-yarns?utm_source=chatgpt.com).
• Fibure yarns comply with ASTM D578-00 standard and are designed for thermal, electrical stability and fire resistance, though detailed specs are not publicly listed [oai_citation:6‡fibure.com](https://fibure.com/products/glass-yarn?utm_source=chatgpt.com).
• For accurate selection, please confirm with specific manufacturer datasheets for parameters like modulus, shrinkage, or coating specifics.

حجب المياهالأراميد غزل

مع تطبيق خيوط الأراميد المانعة للماء، يمكن تلبية المتطلبات الخاصة لكابلات الألياف الضوئية الناعمة الداخلية أثناء الإنتاج.

Water Blocking Aramid Yarn – Technical Data

Units: Linear Density (Dtex or Denier); Linear Density (m/kg); Absorption Speed (ml/g/1 min); Absorption Capacity (ml/g/5 min); Moisture Content (%); Tensile Properties; Thermal / Fire Resistance.

Denier / Dtex	Linear Density (m/kg)	Absorption Speed (ml/g/1 min)	Absorption Capacity (ml/g/5 min)	Moisture Content (%)	Tensile / Modulus	Thermal / Fire Safety
1000 D	7550 ±10%	25	30	≤6	High modulus aramid; high tensile strength	Low shrinkage; high glass-transition temperature; non-conductive, corrosion resistant
1670 D	5500 ±10%	15	20	≤6	—	—
3000 D	2500 ±10%	20	25	≤3	—	—
~1500 D (approx)	—	—	8.0–15.0 g/g	—	Break Strength: ~200–600 N; Elongation: ~3 %	Modulus >75 GPa; Zero hot shrinkage

Notes:
- First three rows are based on aramid yarns from a specific supplier detailing 1000 D, 1670 D, and 3000 D variants with absorption speed, capacity, moisture, and density data. [oai_citation:0‡aoyuanyarn.com](https://www.aoyuanyarn.com/field_1/980786954874806272.html?utm_source=chatgpt.com)
- Fourth row reflects another product listing (approx. 1500 D) showing absorption in g/g, tensile strength, elongation, modulus, shrinkage properties. [oai_citation:1‡glpolygel.en.made-in-china.com](https://glpolygel.en.made-in-china.com/product/kaRpKOLMhhcn/China-1000d-Aramid-Yarn-Water-Blocking-Kevlar-Aramid-Fiber-Yarn-for-Optical-Cables.html?utm_source=chatgpt.com)
- Aramid yarn features include low density, high modulus, low shrinkage, corrosion resistance and high thermal stability—ideal for ADSS, non-metallic, and indoor optical fiber cable reinforcement. [oai_citation:2‡aoyuanyarn.com](https://www.aoyuanyarn.com/field_1/980786954874806272.html?utm_source=chatgpt.com) [oai_citation:3‡teijinaramid.com](https://www.teijinaramid.com/en/brochure/products/Twaron%C2%AE%20product%20brochure?utm_source=chatgpt.com)

كيفلر

Kevlar Yarn – Technical Data

Units: Denier (D); Key Properties: Tensile Strength, Modulus, Elongation at Break, Shrinkage, Temperature & Environmental Resistance.

Grade / Type	Denier (D)	Tensile Strength & Modulus	Elongation at Break (%)	Shrinkage / Thermal Stability	Other Highlights
Kevlar® Para-Aramid (General)	200–7100	High strength-to-weight; very high modulus	Very low elongation	Extremely low thermal shrinkage	Heat/chemical resistance, non-conductive, 5× stronger than steel
Kevlar® T-29 (Standard Modulus)	Varies	Standard modulus level	قليل	Near zero shrink	Balanced strength & flexibility
Kevlar® T-49 (High Modulus)	Varies	Higher modulus than T-29	Very low	Negligible shrinkage	For high-modulus applications
Kevlar® AP	Varies	~15% higher tenacity than T-29	قليل	Very low	Enhanced strength
Kevlar® KM2	Varies	Optimized for ballistic performance	قليل	Minimal	Superior impact resistance
Kevlar® 129 / 149 (High Tenacity)	Varies	Highest tenacity; 149 is strongest	قليل	Very low	For ballistic/armor/aerospace use

Notes:
• Kevlar® is a para-aramid fiber with exceptional tensile strength-to-weight ratio—approximately five times stronger than steel per unit weight. It maintains strength at low thermal expansion and is highly heat, flame, and chemical resistant. [oai_citation:0‡dupont.co.uk](https://www.dupont.co.uk/fabrics-fibers-and-nonwovens/fiber-optics.html?utm_source=chatgpt.com)
• Common Denier grades range from 200 to 7100 D; key types include T-29 (standard modulus), T-49 (high modulus), AP (~15% higher tenacity), KM2 (ballistic), 129/149 (high tenacity) [oai_citation:1‡维基百科](https://en.wikipedia.org/wiki/Kevlar?utm_source=chatgpt.com) [oai_citation:2‡FIBER-LINE®](https://www.fiber-line.com/uploads/pdf%20US/fl.us.datasheet-kevlar-para-aramid.pdf?utm_source=chatgpt.com).
• Kevlar retains its strength at cryogenic temperatures; at elevated temperatures (≥150 °C), tensile strength reduces ~10–20% initially, and more over extended exposure. Minimal shrinkage due to low or negative thermal expansion coefficient. [oai_citation:3‡dupont.com](https://www.dupont.com/content/dam/dupont/amer/us/en/safety/public/documents/en/Kevlar_Technical_Guide_0319.pdf?utm_source=chatgpt.com) [oai_citation:4‡维基百科](https://en.wikipedia.org/wiki/Kevlar?utm_source=chatgpt.com).

صحشو غزل-PP

خيوط حشو FIBER PP مصنوعة من مادة البولي بروبيلين. مع قوة الشد العالية وموحدة
توزيع الشبكة، ويمكن استخدامها لملء الكابلات.

PP Filler Yarn – Technical Data

Units: Denier (D), Linear Density (g/m), Diameter (mm), Breaking Strength (g/D or N), Elongation (%), Heat Shrinkage (%), Heat Shrinkage Temperature (°C).

Product Type / Grade	Denier (D) or Density	Diameter (mm)	Breaking Strength (g/D)	استطالة (%)	Heat Shrinkage (%)	ملحوظات
Star Materials – Normal Grade	20,000–800,000 D	2–30	0.2–0.6	≥20	≤10 at 100 °C (1 min)	Low cost, suitable for large cables
Star Materials – High Grade	3,800–300,000 D	0.8–12	0.6–1.4	≥20	≤10 at 100 °C (1 min)	Uniform, no joints, lighter
Star Materials – Super Grade / Twisted	3,800–200,000 D (Super); up to 60,000 D (Twisted)	0.8–8 (Super); 0.8–5 (Twisted)	2.0–3.5 (Super); 2.3–3.8 (Twisted)	≥20	≤10 at 100 °C (1 min)	Virgin PP, best strength, twisted ensures diameter accuracy
HTS Cable – Standard PP Filler	2,000–30,000 D	—	Not specified (N)	≤15 (decreases)	≤2.5	Metrics given as running meter per kg etc.
Anshi / Longtai – PP Filler	4,000–240,000 D (expansion widths 10–40 mm)	Twisted diameter 0.5–6.0 mm	20–380 N	<20	≤6	High insulation, non-hygroscopic, smooth mesh texture

Notes:
• Star Materials grades: Normal (low cost), High (light & no joint), Super/Super Twisted (virgin PP, high strength). [oai_citation:0‡Shineworld -](https://www.shineworldgroup.com/product-item/pp-filler-yarn/?utm_source=chatgpt.com)
• HTS Telecom data provides linear density to meters per kg and shrinkage under heat. [oai_citation:1‡HTS电缆材料公司](https://www.hts-cable.com/products/68-PP-Filler-Yarn.html?utm_source=chatgpt.com)
• Anshi/Longtai offers expanded denier ranges, mesh-like structure, high tensile in N units. [oai_citation:2‡中国龙泰](https://chinalongtai.en.made-in-china.com/product/iSEQsobUZpVZ/China-Wire-Filler-Yarn-PP-Cable-Polypropylene-Filler-Yarn-ANSHI05-.html?utm_source=chatgpt.com)
• Longtai product pages also show typical filler strengths, elongation, shrinkage rates across ranges. [oai_citation:3‡Jiangxi Longtai New Material Co., Ltd](https://www.polypropylene-twine.com/sale-26112308-twine-polypropylene-cable-filler-yarn-9kd-300kd-for-wire-filling.html?utm_source=chatgpt.com)

ريبكورد

يستخدم Ripcord بشكل أساسي لتجريد أنواع مختلفة من الكابلات. بشكل عام، هناك لونان بما في ذلك الأبيض والأصفر.

Ripcord – Technical Data

Units & Terms: Break Strength (kg or N), Yield (m/kg), Diameter (mm), Absorption or Coating traits.

Product / Material	Break Strength	Yield (m/kg)	Nominal Diameter	Special Features
Fiber-Line® Wearcoat™ Kevlar (K1000)	~55 kg (≈540 N)	~2639 m/kg	~0.762 mm	Lubricated, flat/round geometry, easy under-armour ripping
Fiber-Line® Wearcoat™ Kevlar (K1500)	~91 kg (≈893 N)	~1679 m/kg	~0.905 mm	High strength, rapid ripping, abrasion-resistant
Fiber-Line® Repelcoat™ PET (P3000 HT)	~27 kg (≈265 N)	~2645 m/kg	~0.695 mm	Water-repellent coating, polyester base
Fiber-Line® Blockcoat™ Vectran® (V1420T)	~40 kg (≈393 N)	~6050 m/kg	~0.456 mm	Non-wicking Vectran core for minimal outgassing
FibrXL Ripo™ Series (Aramid)	≥300 N (1-ply, 1680 dtex)	160–190 g per 1000 m	0.4–0.8 mm	Water-blocking, abrasion-resistant, multiple plies variants
Polyester Ripcord (One World)	≥90–180 N	—	—	2000–3000 dtex; twisted with lubricated coating

Notes:
• Fiber-Line® ripcord data corresponds to K-series aramid cores with different coatings and strengths. K1000 (~55 kg) and K1500 (~91 kg).([turn0search2] [oai_citation:0‡owcable.com](https://www.owcable.com/ripcord-product/?utm_source=chatgpt.com), [turn0search10] [oai_citation:1‡FIBER-LINE®](https://www.fiber-line.com/en/products/ripcords?utm_source=chatgpt.com))
• FibrXL Ripo™ series (Aramid): e.g., 1680 dtex 1-ply delivers ≥300 N tensile, diameter ~0.4 mm, water-blocking or abrasion finishes.([turn0search8] [oai_citation:2‡FibrXL](https://fibrxl.com/wp-content/uploads/2020/07/FibrXL-PDS-performance-0720-DEF-Ripo.pdf?utm_source=chatgpt.com))
• Polyester ripcord data (One World): twisted high-strength polyester, 2000–3000 dtex, tensile ≥90–180 N.([turn0search14] [oai_citation:3‡owcable.com](https://www.owcable.com/ripcord-product/?utm_source=chatgpt.com))
• Ripcords are embedded under jackets for easy sheath removal. Typical materials include aramid (Kevlar), Vectran, PET, with coatings like lubrication, water-repellent, water-blocking.([turn0search2] [oai_citation:4‡FIBER-LINE®](https://www.fiber-line.com/uploads/pdf%20US/fl.us.datasheet-ripcords.pdf?utm_source=chatgpt.com), [turn0search1] [oai_citation:5‡avient.com](https://www.avient.com/products/fiber-line-engineered-fiber-solutions/fiber-line-engineered-fiber-products/ripcords-fiber-optic-cable?utm_source=chatgpt.com), [turn0search9] [oai_citation:6‡focenter.com](https://focenter.com/evaluation-of-fiber-optic-ripcord-designs-and-use-procedures-post?utm_source=chatgpt.com))
• In many cable designs, ripcords are built beneath the jacket to rip buffer tubes or binders. Denier often 1.5–2.5× binder denier for effective ripping.([turn0search4] [oai_citation:7‡Google Patents](https://patents.google.com/patent/US6813421B2/en?utm_source=chatgpt.com))

الكروم مطليفُولاَذالشريط

الشريط الفولاذي المطلي بالكروم يعتمد الأشرطة الفولاذية المدلفنة على البارد ذات الجودة العالية من Baosteel وShougang؛ لديها التصاق ممتاز للطلاء، ومقاومة ممتازة للحرارة، ومقاومة ممتازة للكبريتات، ومقاومة ممتازة للتآكل الخيطي، ومقاومة ممتازة للقلويات؛ سطح أملس، لا تجاعيد، لف أنيق؛ ينطبق على درع كابل الاتصالات والطبقة المدرعة المقاومة للرطوبة ومواد التعبئة والتغليف.

Chrome-Plated Steel Tape – Technical Data

Units: Width (mm); Steel thickness (mm); Coating thickness (mm); Tensile strength (MPa); Elongation at break (%); Peel strength (N/cm); Heat-seal strength (N/cm); Additional features.

Application / Type	عرض	Steel Thickness	Coating Thickness	قوة الشد	استطالة عند الكسر	قوة قشر	Heat-Seal Strength	سمات
ECCS Tape (general cable armor)	15–80 mm ±0.05	0.155 mm	0.055 mm (both sides)	≥310 N/mm² (≈310–420 MPa)	≥15%	≥6.13 N/cm	≥17.5 N/cm	High corrosion, crush, twist resistance; copolymer coating
Copolymer Coated Steel Tape (wide width)	15–405 mm	0.12–0.20 mm	0.04–0.60 mm	300–420 MPa	≥15%	≥6.13 N/cm	≥17.5 N/cm	Ethylene copolymer lamination, excellent adhesion, chemical resistant

Notes:
• ECCS (Electrolytic Chrome Coated Steel) tape used in armoring fiber-optic cables; typical width 15–80 mm, 155 µm steel, 55 µm coating, tensile ≥310 N/mm², elongation ≥15 % [oai_citation:0‡Alibaba](https://www.alibaba.com/product-detail/Electrolytic-Chrome-Coated-Steel-Tape-for_1601487318513.html?utm_source=chatgpt.com)
• Copolymer-coated variant available in wider reels (up to 405 mm), steel thickness 0.12–0.20 mm, coating 0.040–0.60 mm, tensile 300–420 MPa, peel ≥6.13 N/cm, heat-seal ≥17.5 N/cm [oai_citation:1‡上海金属](https://www.shanghaimetal.com/copolymer_coated_steel_tape_for_cable-192.htm?utm_source=chatgpt.com)
• Common in armored cables for protection against rodents, mechanical crush, corrosion; coating enables easy bonding with PE sheaths [oai_citation:2‡Eastmac Machinery Inc.](https://eastmacmc.com/products/copolymer-coated-eccs-armour-tape-for-cables-wrapping-and-shielding?utm_source=chatgpt.com) [oai_citation:3‡上海金属](https://www.shanghaimetal.com/copolymer_coated_steel_tape_for_cable-192.htm?utm_source=chatgpt.com).

كوبوليمرالمغلفةالشريط الصلب

1. الشريط الفولاذي المطلي بالبوليمر المشترك مطلي براتنج كوبوليمر حمض الإيثيلين-الأكريليك (EAA) على أحد أو كلا جانبي الشريط الأساسي الفولاذي المطلي بالكروم لتحقيق درجة معينة من الالتصاق، واللون أخضر؛
2. درجة التقسية هي T1-T3؛
3. المظهر: مستقيم، ناعم، موحد، لا شوائب، لا تجاعيد، وبقع الزهور.

Copolymer Coated Steel Tape – Technical Data

Units: Width (mm); Steel Thickness (mm); Copolymer Thickness (mm); Tensile Strength (MPa); Elongation (%); Peel Strength (N/cm); Heat-Seal Strength (N/cm); Reel Length (m); Standards.

تخصيص	Range / Value
عرض	15–405 (standard), up to 600–1100 mm custom
Steel Thickness	0.12–0.20 mm
Copolymer (EAA) Coating Thickness	Approx. 0.05 mm each side (single/double)
Total Thickness	0.17–0.25 mm overall
قوة الشد	310–420 MPa
استطالة عند الكسر	≥15–20%
Peel Strength (lamination)	≥6.13 N/cm
Heat-Seal Strength	≥17.5 N/cm
Reel Length	>2,100 m
Standards	ASTM, YD/T 723.3, ICEA S-66

Notes:
• Typical cable armoring variant (ECCS); used inside polyethylene jacket for moisture and mechanical protection. • Wall-mounted copolymer bonding ensures compatibility with LLDPE, MDPE, HDPE. – [oai_citation:0‡星辰材料](https://www.star-materials.com/copolymer-coated-steel-tape/?utm_source=chatgpt.com) • Vitahco lists thickness ~0.15 mm steel, coating ~0.05 mm, tensile ≥310 MPa, elongation ≥20 %, peel strength ≥6.13 N/cm. – [oai_citation:1‡Vitahco](https://www.vitahco.com/copolymer-coated-steel-tape?utm_source=chatgpt.com) • Width up to ~600–1100 mm per customization; tensile strength 300–420 MPa; peel ≥6.13 N/cm; heat-seal ≥17.5 N/cm. – [oai_citation:2‡kuayuecable.en.made-in-china.com](https://kuayuecable.en.made-in-china.com/product/lxMrJaUOvDWi/China-Copolymer-Coated-Steel-Tape-for-Cables-PPGL-ECCS-Tape-.html?utm_source=chatgpt.com) [oai_citation:3‡newcore.net.in](https://www.newcore.net.in/product/copolymer-coated-stainless-steel-tape-for-cable-armoring/index.html?utm_source=chatgpt.com) • WUXI SUDA notes total thickness 0.20–0.25 mm, chromium coating weight 0.08–0.34 g/m². – [oai_citation:4‡copolymercoatedaluminumtape.com](https://www.copolymercoatedaluminumtape.com/copolymer-coated-tape/copolymer-coated-steel-tape/eccs-for-sale.html?utm_source=chatgpt.com)

كوبوليمر المغلفةشريط الألمنيوم

1. يتم طلاء شريط الألمنيوم المطلي بالكوبوليمر على جانب واحد أو كلا الجانبين من النطاق الأساسي للألمنيوم مع راتنج كوبوليمر حمض الإيثيلين-الأكريليك (EAA)، لتحقيق درجة معينة من الالتصاق، على أساس اللون أو الأزرق؛
2. حالة السبائك هي O، رقم العلامة التجارية هو 1145، 8011، إلخ؛

Copolymer Coated Steel Tape – Technical Data

Units: Width (mm); Steel Thickness (mm); Copolymer Thickness (mm); Tensile Strength (MPa); Elongation (%); Peel Strength (N/cm); Heat-Seal Strength (N/cm); Reel Length (m); Standards.

تخصيص	Range / Value
عرض	15–405 (standard), up to 600–1100 mm custom
Steel Thickness	0.12–0.20 mm
Copolymer (EAA) Coating Thickness	Approx. 0.05 mm each side (single/double)
Total Thickness	0.17–0.25 mm overall
قوة الشد	310–420 MPa
استطالة عند الكسر	≥15–20%
Peel Strength (lamination)	≥6.13 N/cm
Heat-Seal Strength	≥17.5 N/cm
Reel Length	>2,100 m
Standards	ASTM, YD/T 723.3, ICEA S-66

كابلكريم

طلب

إنه مصمم خصيصًا لملء الغلاف بشفط الماء ومعجون الكابلات من النوع الموسع. أفضل درجة حرارة تشغيل لها هي درجة الحرارة العادية، ومع ارتفاع درجة الحرارة، تنخفض اللزوجة تدريجياً.

التوافق

إنه يتمتع بتوافق جيد مع معظم مواد البوليمر ومواد الفولاذ والألمنيوم. ومع ذلك، نوصي باختبار توافق جميع مواد البوليمر الملامسة للمرهم.

سمات

إنه عبارة عن معجون كبل مانع للماء من النوع الموسع الذي يمتص الماء. يبقى ناعمًا عند درجة حرارة منخفضة -40 درجة مئوية ولا ينقط عند درجة حرارة عالية 80 درجة مئوية. إن الانسيابية مناسبة لعملية التعبئة الباردة. إنه يتميز بإنتاج هيدروجين منخفض جدًا، وفصل الزيت صفر، ومقاومة ممتازة للأكسدة، واستقرار طويل الأمد.

قابلية التصنيع

إنه مصمم لعملية التعبئة الباردة لتجنب الفراغ الناتج عن انكماش المرهم.

Fiber Optic Cable Pulling Lubricant – Technical Data

Units/Terms: COF = Coefficient of Friction; Viscosity (cP); pH; % Solids; Appearance; Temp Range; Compatibility.

Product / Type	COF (typical)	Viscosity (cP)	pH	% Non-volatile Solids	مظهر	Temp Range	الميزات الرئيسية
Polywater® F	~0.10	1 000–3 000	8.0–9.5	<5%	Orange-stringy liquid	–5 °C to 60 °C	GR-356-CORE compliant, wets PE jacket, slow-drying residual film
Techlube FO	Not specified	2000–35 000	Neutral (~7)	Not specified	Water-based pourable	Stability in flooded ducts	Biodegradable, non-toxic, sticks in wet/ flooded ducts
3M™ Wire Pulling Lubricant (WL-Series)	<0.11 (dynamic)	Not specified	6.5–8.5	2.5–3.5%	Translucent white gel	–7 °C to 44 °C	Low solids, non-staining, no wax/grease/silicone
Super Lube® SuperPull	Not specified	Not specified	Not specified	Not specified	Aqueous polymeric gel	–26 °C to 104 °C	Low COF, wide‐temp range, compatible with fiber jacketing

Notes:
• Polywater® F: High-performance, pourable lubricant for underground fiber optic pulls; COF ≈0.1 on MDPE in HDPE innerduct. Compatible with wide array of jackets and GR-356-CORE standard [oai_citation:0‡Polywater](https://www.polywater.com/en/technical-data-sheet/f-communications-lubricant-tds/?utm_source=chatgpt.com).
• Techlube FO: Water-based, biodegradable, stringy-cling lubricant ideal for long, wet or flooded duct pulling; viscosity 2 000–35 000 cP; neutral pH [oai_citation:1‡Power and Cables](https://www.powerandcables.com/wp-content/uploads/2017/07/Fibre-Optic-Cable-Pulling-Lubricant-TechLube-FO-Lubricant-For-Fibre-Optic-Cable-Pulling-min.pdf?utm_source=chatgpt.com).
• 3M WL-Series: Translucent white polymer gel; COF <0.11 dynamic (PVC jackets on PVC conduit at 200 lb/ft); pH 6.5–8.5; non-staining, easy cleanup [oai_citation:2‡3M 多媒体](https://multimedia.3m.com/mws/media/41334O/wl-wire-pulling-lubricant.pdf?utm_source=chatgpt.com).
• Super Lube® SuperPull: Aqueous gel compatible with fiber jackets; operates from –26 °C to 104 °C; low friction; no flash, safe for jackets [oai_citation:3‡Super Lube](https://www.super-lube.com/superpull-electrical-fiber-optic-pulling-compound-2?utm_source=chatgpt.com).

الفيبركريم

طلب

إنه مصمم خصيصًا لإنتاج عالي السرعة للكابلات ذات الأكمام السائبة

التوافق

إنه يتمتع بتوافق جيد مع ألياف الأكريليك المطلية بالراتنج ومواد البوليمر للكابلات الضوئية. ومع ذلك، نوصي باختبار توافق جميع مواد البوليمر الملامسة للمرهم.

سمات

وهو عبارة عن معجون ألياف غير لزج وغير سيليكون ومضاد للماء. يبقى ناعمًا عند درجة حرارة منخفضة -50 درجة مئوية ولا ينقط عند درجة حرارة عالية 80 درجة مئوية. Thixotropy مناسب لعملية التعبئة الباردة. يمكن أن يمنع نمو العفن، وإنتاج الهيدروجين المنخفض للغاية، وفصل الزيت صفر، وله مقاومة ممتازة للأكسدة واستقرار طويل الأمد.

قابلية التصنيع

إنه مصمم لعملية التعبئة الباردة لتجنب الفراغ الناتج عن انكماش المرهم.

Fiber Optic Cable Pulling “Fiber Cream” – Technical Data

Units / Terms: Viscosity (cP); pH; Appearance; Drying Behavior; Temperature Resistance; Compatibility.

منتج	Viscosity (cP)	pH	مظهر	Drying Behavior	Temp Resistance	الميزات الرئيسية
Greenlee CRM-1 “Fiber-Cream”	30,000–45,000	7.0–8.0	Light yellow cream	Dries slowly to thin, non-conductive, non-hardening film	Stable in heat and freezing	Adheres well, non-staining, easy cleanup, compatible with fiber jackets

Notes:
• Greenlee CRM-1 “Fiber-Cream” is formulated for fiber optic cable pulls, featuring a viscosity of 30,000–45,000 cP, neutral pH (7–8), and a light yellow gel-like appearance. It dries slowly into a thin, non-conductive, non-hardening film, remains stable under both cold and hot conditions, and ensures easy cleanup with no staining or residue. Compatible with all cable insulation types. [oai_citation:0‡globaltestsupply.com](https://www.globaltestsupply.com/product/greenlee-crm-1-cable-cream-cable-pulling-lubricant?srsltid=AfmBOoqlmUOosl6aw3OzhWHtITc9FcAIqLpFNiDAKAQuMINf1NpujVDP&utm_source=chatgpt.com)

الفيبر

Optical Fiber – Mechanical and Geometrical Data

Units/Terms: Core/Cladding/Coating diameter; Proof Test Stress; Young’s Modulus; Ultimate Tensile Strength; Operating Temp Range; Fiber Standards.

معامل	Value / Range
Core Diameter	8–10 µm (single-mode)
Cladding Diameter	125 µm
Coating Diameter	200–250 µm
Proof Test Stress	~0.69 GPa (100 ksi); some fibers up to 1.2% strain (≈1.2 GPa)
Youth’s Modulus (E)	≈16.6 GPa (with coating); up to ≈69 GPa (bare fiber)
Ultimate Tensile Strength	~5.3 GPa (~750 ksi) median dynamic strength
درجة حرارة التشغيل	–60 °C to +85 °C
Applicable Standards	ITU-T G.652, G.657, G.655

Notes:
• Single-mode optical fibers typically have a core diameter of 8–10 µm, cladding of 125 µm and coating around 200–250 µm [oai_citation:0‡电信顾问印度有限公司](https://www.tcil.net.in/tender/pdf/24a1025_1.pdf?utm_source=chatgpt.com).
• Proof test stress is about 100 ksi (~0.69 GPa); some fibers (e.g., G.652.D PureBand) withstand up to ~1.2% strain [oai_citation:1‡康宁](https://www.corning.com/media/worldwide/coc/documents/Fiber/SMF-28%20ULL.pdf?utm_source=chatgpt.com) [oai_citation:2‡Sumitomo Electric](https://global-sei.com/fttx/optical-fibers/pureband-pureaccess/?utm_source=chatgpt.com).
• Young’s modulus (E) measured (E×A) yields ~16.6 GPa with coating, up to ~69 GPa for bare fiber [oai_citation:3‡ResearchGate](https://www.researchgate.net/publication/221925175_Mechanical_Properties_of_Optical_Fibers?utm_source=chatgpt.com).
• Median dynamic tensile strength measured at 5.3 GPa (~750 ksi) after aging conditions [oai_citation:4‡普睿斯曼](https://www.prysmian.com/sites/default/files/business_markets/markets/downloads/datasheets/SMF---Single-Mode-Optical-Fiber-SSMF.pdf?utm_source=chatgpt.com).
• Operating temperature for typical fiber (e.g., Corning SMF-28 ULL) spans –60 °C to +85 °C [oai_citation:5‡康宁](https://www.corning.com/media/worldwide/coc/documents/Fiber/SMF-28%20ULL.pdf?utm_source=chatgpt.com).
• Relevant single-mode standards include ITU-T G.652 (most common), G.657 (bend-insensitive) and G.655 (non-zero dispersion-shifted) [oai_citation:6‡en.wikipedia.org](https://en.wikipedia.org/wiki/G.652?utm_source=chatgpt.com).

بصريكابلبلاستيك

Optical Cable Plastic Sheath Materials – Technical Data

Parameters: Material Type; Key Properties; Typical Applications.

المواد	Key Properties	Typical Applications
Polyethylene (PE: LDPE, MDPE, HDPE, XLPE)	Low cost; UV and chemical resistance; excellent dielectric; outdoor durability	Outdoor cable jacket, direct burial, overhead use
Low Smoke Zero Halogen (LSZH)	Flame retardant; low smoke; zero halogen emissions; oil resistance	Indoor use, fire-safe environments
Polyvinyl Chloride (PVC)	Good chemical/weather resistance; low cost; moderate flame resistance	General-purpose cable jacketing
Polyurethane (PU / TPU)	High abrasion resistance; chemical/oil resistance; flexible	Industrial or tactical applications
Cable Co-polymers (e.g., NBR/PVC blends, ETFE)	Specialized chemical and wear resistance	Harsh environment or specialty cable designs

Sources:
• Common sheathing materials include PE (LDPE, MDPE, HDPE, XLPE)—renowned for durability, outdoor UV resistance, and low cost [oai_citation:0‡keyfibre.com](https://www.keyfibre.com/en/types-of-sheaths-used-in-fibre-optic-cables/?utm_source=chatgpt.com) [oai_citation:1‡angreen.com](https://www.angreen.com/news/what-material-fiber-optic-cables-made-of.html?utm_source=chatgpt.com) [oai_citation:2‡farahipolymer.com](https://farahipolymer.com/fiber-optic-cable-materials/?utm_source=chatgpt.com).
• LSZH is valued for flame retardance and low smoke emissions, ideal for indoor safety-critical environments [oai_citation:3‡honecable.com](https://www.honecable.com/6-fiber-cable-outer-sheath-materials/?utm_source=chatgpt.com) [oai_citation:4‡angreen.com](https://www.angreen.com/fiber-optic-cable-material/?utm_source=chatgpt.com).
• PVC is widely used for general-purpose sheathing due to chemical/weather resistance and cost-effectiveness [oai_citation:5‡honecable.com](https://www.honecable.com/6-fiber-cable-outer-sheath-materials/?utm_source=chatgpt.com).
• PU and TPU offer superior abrasion and chemical resistance, used in demanding industrial or military cable applications [oai_citation:6‡angreen.com](https://www.angreen.com/news/what-material-fiber-optic-cables-made-of.html?utm_source=chatgpt.com).
• Specialized copolymers such as NBR/PVC blends and ETFE are applied for unique environmental or mechanical requirements [oai_citation:7‡keyfibre.com](https://www.keyfibre.com/en/types-of-sheaths-used-in-fibre-optic-cables/?utm_source=chatgpt.com).

التغليف مادة

Optical Cable Sheathing Materials – Technical Data

Parameters: Material; Key Attributes; Typical Use Cases.

المواد	Key Attributes	Typical Use Cases
Polyethylene (PE: LDPE, MDPE, HDPE, XLPE)	Affordable; chemical & moisture resistant; UV stable; excellent dielectric; strong abrasion resistance	Outdoor cable jacket; direct-burial; aerial installations
Low Smoke Zero Halogen (LSZH)	Flame-retardant (UL94 V-0); low smoke emission; halogen-free; high tensile strength; abrasion & UV resistant	Indoor spaces; tunnels; data centers; fire-safe environments
Polyvinyl Chloride (PVC)	Good weather & chemical resistance; economical; moderate flame resistance; smooth finish	General-purpose jacketing; indoor/outdoor use where cost-sensitive
Polyurethane (PU / TPU)	Outstanding abrasion & oil resistance; highly flexible; suitable for harsh conditions	Industrial, tactical, or heavy-duty cable applications
Polyamide (PA), NBR/PVC blends, ETFE	Enhanced wear & chemical resistance; high-performance polymers	Specialized or extreme-environment cable designs

Sources:
• PE (LDPE, MDPE, HDPE, XLPE) offers cost-efficient, durable sheathing for outdoor fiber cable usage. [oai_citation:0‡owcable.com](https://www.owcable.com/technology/analysis-of-optical-cable-sheath-materials-all-round-protection-from-basic-to-special-applications/?utm_source=chatgpt.com)
• LSZH provides flame safety and reduced smoke/toxic emissions, meeting UL94 V-0 and IEC 60332 standards. [oai_citation:1‡angreen.com](https://www.angreen.com/lszh-optical-cable-material/?utm_source=chatgpt.com) [oai_citation:2‡keyfibre.com](https://www.keyfibre.com/en/types-of-sheaths-used-in-fibre-optic-cables/?utm_source=chatgpt.com)
• PVC combines chemical and weather resistance with cost effectiveness, commonly used in general cable applications. [oai_citation:3‡HOC](https://www.honecable.com/6-fiber-cable-outer-sheath-materials/?utm_source=chatgpt.com) [oai_citation:4‡keyfibre.com](https://www.keyfibre.com/en/types-of-sheaths-used-in-fibre-optic-cables/?utm_source=chatgpt.com)
• PU/TPU ensures mechanical resilience with flexibility, used in industrial or tactical scenarios. [oai_citation:5‡angreen.com](https://www.angreen.com/news/what-material-fiber-optic-cables-made-of.html?utm_source=chatgpt.com)
• Specialty polymers like PA, NBR/PVC blends, and ETFE achieve higher performance for demanding environments. [oai_citation:6‡keyfibre.com](https://www.keyfibre.com/en/types-of-sheaths-used-in-fibre-optic-cables/?utm_source=chatgpt.com) [oai_citation:7‡angreen.com](https://www.angreen.com/news/what-material-fiber-optic-cables-made-of.html?utm_source=chatgpt.com)

OFCعضو القوة

معامل مرونة عالية وقوة شد، استقامة جيدة وتحمل ضيق، طلاء فوسفات موحد وثقيل.
يمكن أن يكون السطح بالفوسفات أو مطلي بالزنك.

Optical Cable Strength Member – Non-Yarn Components

Parameters: Material; Form; Function; Typical Use Cases.

المواد	Form	وظيفة	Typical Use Cases
Steel Rod or Strand	Rod or strand	Provides high tensile strength and crush resistance	Armored outdoor cables; installations requiring rigid protection
Glass Fiber-Reinforced Plastic (FRP)	Pultruded rod	Non-metallic rigidity, dielectric property, crush resistance	All-dielectric cables; aerial and non-conductive applications
Central Dielectric Rod	Solid plastic rod (e.g., FRP)	Maintains cable geometry and prevents buckling	Loose-tube and tight-buffered cable constructions

Sources:
• Fiber optic cables often include steel rods as strength members to provide high tensile strength and protection against crush in rugged or armored environments. [oai_citation:0‡光纤销售网](https://www.fiberoptics4sale.com/blogs/archive-posts/95148166-fiber-optic-cable-tutorial?srsltid=AfmBOooJvjDpyufWHiRNIRDtgTw4AR2R92N_TUi84Pfs9Oei6pwgx5QB&utm_source=chatgpt.com)
• FRP (Fiberglass-Reinforced Plastic) rods offer a non-metallic, dielectric alternative for strength members, especially suitable for non-conductive or aerial cable designs; FRP advantages include high strength-to-weight, corrosion resistance, and long service life. [oai_citation:1‡HOC](https://www.honecable.com/frp-fiber-optic-cable-csm-materials/?utm_source=chatgpt.com) [oai_citation:2‡Yulong FRP New Material](https://yulongfrp.com/product/frp-strength-member/?utm_source=chatgpt.com)
• Central dielectric rods—often of FRP—are employed within loose-tube or tight-buffered cables to maintain structural integrity and prevent buckling. [oai_citation:3‡img-en.fs.com](https://img-en.fs.com/file/datasheet/bulk-fiber-cables.pdf?utm_source=chatgpt.com) [oai_citation:4‡光纤销售网](https://www.fiberoptics4sale.com/blogs/archive-posts/95148166-fiber-optic-cable-tutorial?srsltid=AfmBOooJvjDpyufWHiRNIRDtgTw4AR2R92N_TUi84Pfs9Oei6pwgx5QB&utm_source=chatgpt.com)

أسلاك الفولاذلOFC

قوة الشد العالية والاستقامة. يمكن أن يكون السطح فوسفاتي أو مطلي بالزنك

Optical Cable Steel Wire Strength Member – Technical Data

Parameters: Configuration; Diameter; Tensile Strength (N); Use Case.

Configuration / Cable Type	Steel Wire Diameter	قوة الشد	Typical Application
Standard Drop Cable	Approx. 1.0 mm	360 N (long-term); 1200 N (short-term)	FTTH subscriber drop installations
Outdoor Unitube Armored Cable	Two wires, 0.9 mm each	Max short-term tensile ~1500 N	Armored loose-tube outdoor environments

Data Summary:
• Drop Cable (FTTH): Incorporates a 1 mm steel wire strength member, providing 360 N tensile strength in long-term use, up to 1200 N for short-term pulls. [oai_citation:0‡亚马逊](https://www.amazon.com/Outdoor-Optical-G657A1-Single-Strength/dp/B07PPTFLR6?utm_source=chatgpt.com)
• Outdoor Unitube Armored Cable: Uses two parallel steel wires (0.9 mm dia each), offering up to 1500 N short-term tensile capacity. [oai_citation:1‡Molexces](https://www.molexces.com/webfoo/wp-content/uploads/AFOUN.pdf?utm_source=chatgpt.com)

هل أنت مستعد لبدء رحلة تصنيع الكابلات الخاصة بك؟

احصل على استشارة الخبراء والحلول المخصصة لعملك

مواد خام

طاولةمحتوياتلهذه الصفحة

منتجات مواد الكابلات

شريط فولاذي/شريط ألومنيوم

هلام متغيرة الانسيابية

الألياف الأساسية

مواد التغليف البلاستيكية

عضو قوة الكابل

حجب المياهالشريط

حجب المياهغزل

القوات المسلحة السودانيةحجب المياهغزل

بوليستر بيندرغزل

زجاجغزل

حجب المياهالأراميد غزل

كيفلر

صحشو غزل-PP

ريبكورد

الكروم مطليفُولاَذالشريط

كوبوليمرالمغلفةالشريط الصلب

كوبوليمر المغلفةشريط الألمنيوم

كابلكريم

طلب

التوافق

سمات

قابلية التصنيع

الفيبركريم

طلب

التوافق

سمات

قابلية التصنيع

الفيبر

بصريكابلبلاستيك

التغليف مادة

OFCعضو القوة

أسلاك الفولاذلOFC

هل أنت مستعد لبدء رحلة تصنيع الكابلات الخاصة بك؟

أنا القائمة طعام

اطلب الاقتباس

سوف نقوم بالرد عليك خلال 24 ساعة!!!